![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Nov 2001
Location: Bay Area, CA
Posts: 58
|
![]() I rarely rev over 5000rpm on my daily driver and was wondering if the intake is the next bottleneck on my basiclly stock motor. I have most of the bolt-ons and was wondering what to replace next.
|
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
![]() going to an aftermarket intake on a stock engine will get you about 10HP for 300-500 bucks.
If you dont already have gears, get gears. Later,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Apr 1999
Location: San Francisco, CA
Posts: 205
|
![]() both the heads and the intake are "bottlenecks". I personally feel the heads are more of a bottleneck than the intake though... but with the right one you will feel a bit more umph all the way through your powerband.
XR1stang
__________________
I used to hate computers, until the server went down on me... |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Apr 1999
Location: San Francisco, CA
Posts: 205
|
![]() oh yeah, do the gears if you don't have them already.
![]() XR1stang
__________________
I used to hate computers, until the server went down on me... |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Mar 1999
Location: Jackson, LA
Posts: 264
|
![]() i agree with both previous post's, it is true that the stock intake isn't the best for even a stock motor, but i would obtain other things before i would address the intake such as:
1. gears 2. exhaust: catback, h-pipe, headers 3. advance timing 4. remove air silencer then i would go on to the intake, heads, roller rockers, cam, and all the small side items (65mm tb, larger mass air, and so on) i did mine piece at a time and acutally put a cobra intake before i did the heads and i noticed a good increase at the track 14.79 to 14.55 and i think 1.5 mph, but that was with all exhaust in place and everything and also it depends on what intake you go with. if you stick with a long runner such as the cobra, edelbrock, or gt-40 you will be ok stock, just don't go with a huge intake or short runners and you will be ok if you plan on never doing heads.
__________________
GT-40X heads(58cc), Cobra upper and lower, 75 mm Bullet, Moroso fenderwell induction, FRPP 65mm TB, 24# injectors, black magic electric fan, phenolic spacer, 1.7 crane cobra roller rockers, crane 2031, BBK 1 5/8 equal length hearders, 2.5 inch off road pipe, 2.5 flowmaster catback, FMS 3.55 gears, T5-Z transmission, FRPP aluminum driveshaft, svo heavy duty clutch, mcleod bullet proff bellhousing, BBK adjustable cluth quadrant, hurst billet shifter, lakewood subframes, BBK strut tower brace, BBK 2pt lower cross bar, FMS 190 lph fuel pump, crane ps91 coil, FMS street pulleys, and 300+ race wires. All thanks goes to my wife sheri, jason, jeff, robby, my dad and all others you helped contribute. most importantly GOD!!! |
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Nov 2001
Location: Bay Area, CA
Posts: 58
|
![]() I'll add my sig here...
Just wondering what to do next...
__________________
3.55 FMS gears, B&M shifter, high flow cat h-pipe, Moroso CAI, FMS pulleys, Steeda springs, upper and lower control arms, rear sway bar, G-brace, strut tower brace, KYB shocks/struts, Griggs sub frame connectors, 73mm calipers, SS lines and Hawk pads. |
![]() |
![]() |
![]() |
#7 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
![]() I would go with some good aftermarket heads next with an explorer/GT-40p intake manifold.
You have already layed the groundwork for a good performing car with all of the suspension work you have done.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
GT40 vs Stock lower intake difference | ca_mustang | Windsor Power | 3 | 03-02-2004 05:03 PM |
Questions about hoses connected to stock intake | zepherman | Windsor Power | 14 | 09-13-2002 05:05 AM |
Trick Flow "R" Intake on a stock 88 5.0??? | BowTie Eater 5 Liter | Windsor Power | 3 | 01-15-2001 09:44 AM |
Trick Flow "Street" Intake | BowTie Eater 5 Liter | Windsor Power | 7 | 01-12-2001 11:04 AM |
2000 Street Stock - the $15,000 question | Tim Miller | Racer's Club House | 4 | 10-20-1999 07:09 PM |