Where can I find a whole new plug in dashboard gauge cluster of for a 96 mustang gt?

96_4.6 · 08-28-2003, 03:43 PM

Yea long story short my gauges are jacked, the fuel gauge doesnt move and when I;m driving I cant go over 50, I mean I was flying but the cluster stops at 50 so does anyone know where I can find a whole new cluster that plugs in not just the faces cause it has to be recalibrated cause the rpms are off and so is everything else and I dont wanna get ripped from the dealer, thanks!!!!

Dark_5.0 · 08-28-2003, 04:30 PM

best bet is ebay.

96_4.6 · 08-28-2003, 04:37 PM

Thanks, but which one is the right one, i need one to plug in and I found one thats the whole thing it even had the mileage meter is that the right one and can I somehow take that part out so my mileage reads cause I'm only at 72,500 and that one is the whole cluster and its at 100,000 but in good shape. SO when it says This is the full cluster not just the gauges, that means its the right one correct????? Thanks

roundeye82 · 08-29-2003, 11:25 AM

You can try Dallas Mustang. They have just about everything for your mustang. Also, you may just have a bad connection on the Speedo gauge cluster. I don't know if you checked that yet.

96_4.6 · 08-29-2003, 11:13 PM

Yea well I just messed it up worse by removing the needles, I got pissed and just removed and put them back on and now they work but everything is sooooooo off, i can go like 0-60 in like 3 seconds now cause its off so bad and my engine is so cold is starts off belows the C on the temp gauge, damn it

ac97gt · 08-30-2003, 06:10 PM

this how-to is for white face gauges, you need to remove the needles to do. it tells you how to put them back and has some tips and tricks. im sure you didnt document your needle positions..... which makes it alot harder, but if i remember right they tell you how to fix. maybe you can try to remember where they were and get them close until you get the new pod?

Shaggy · 08-30-2003, 07:48 PM

Your other option would be something like this....

They aren't listing the mechanical speedo years on there website but I believe they do make on for them. You would need to call and find out for sure.

ac97gt · 08-30-2003, 11:47 PM

those gauges are awesome shaggy. i just did a quick search to find them, the only ones i could find were ones for 99+, and they were like $450. very very pricey, but they are so nice!

96_4.6 · 08-31-2003, 01:21 AM

I'm gonna try one on ebay, i dont want white cause I drive a GT but the ones I am trying to get have the meter running at 101,000 is that gonna stay or can I sub in my 72,700?

08-28-2003, 03:43 PM	#1
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	Where can I find a whole new plug in dashboard gauge cluster of for a 96 mustang gt? Yea long story short my gauges are jacked, the fuel gauge doesnt move and when I;m driving I cant go over 50, I mean I was flying but the cluster stops at 50 so does anyone know where I can find a whole new cluster that plugs in not just the faces cause it has to be recalibrated cause the rpms are off and so is everything else and I dont wanna get ripped from the dealer, thanks!!!! __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

08-28-2003, 04:30 PM	#2
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	best bet is ebay. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

08-28-2003, 04:37 PM	#3
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	Thanks, but which one is the right one, i need one to plug in and I found one thats the whole thing it even had the mileage meter is that the right one and can I somehow take that part out so my mileage reads cause I'm only at 72,500 and that one is the whole cluster and its at 100,000 but in good shape. SO when it says This is the full cluster not just the gauges, that means its the right one correct????? Thanks __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

08-29-2003, 11:13 PM	#5
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	Yea well I just messed it up worse by removing the needles, I got pissed and just removed and put them back on and now they work but everything is sooooooo off, i can go like 0-60 in like 3 seconds now cause its off so bad and my engine is so cold is starts off belows the C on the temp gauge, damn it __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

08-30-2003, 06:10 PM	#6
ac97gt Registered Member Join Date: May 2003 Location: Virginia (DC) Posts: 232	this how-to is for white face gauges, you need to remove the needles to do. it tells you how to put them back and has some tips and tricks. im sure you didnt document your needle positions..... which makes it alot harder, but if i remember right they tell you how to fix. maybe you can try to remember where they were and get them close until you get the new pod? __________________ 1997 Mustang GT "Pacific Green" Flowmasters Bassani X w/cats Steeda Triax K&N and Air Intake Silencer Removed More to come with money! My Ride

08-29-2003, 11:25 AM	#4
roundeye82 Registered Member Join Date: Jun 2003 Location: Tioga, LA Posts: 20	You can try Dallas Mustang. They have just about everything for your mustang. Also, you may just have a bad connection on the Speedo gauge cluster. I don't know if you checked that yet.

08-30-2003, 07:48 PM	#7
Shaggy Registered Member Join Date: Feb 1999 Location: Houston,TX Posts: 466	Your other option would be something like this.... They aren't listing the mechanical speedo years on there website but I believe they do make on for them. You would need to call and find out for sure. __________________ A good plan, violently executed now, is better than a perfect plan next week. George S. Patton, General (1885-1945)

08-30-2003, 11:47 PM	#8
ac97gt Registered Member Join Date: May 2003 Location: Virginia (DC) Posts: 232	those gauges are awesome shaggy. i just did a quick search to find them, the only ones i could find were ones for 99+, and they were like $450. very very pricey, but they are so nice! __________________ 1997 Mustang GT "Pacific Green" Flowmasters Bassani X w/cats Steeda Triax K&N and Air Intake Silencer Removed More to come with money! My Ride

08-31-2003, 01:21 AM	#9
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	I'm gonna try one on ebay, i dont want white cause I drive a GT but the ones I am trying to get have the meter running at 101,000 is that gonna stay or can I sub in my 72,700? __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
90, 91, 92, 93 Mustang GT?	Fox Body	Windsor Power	22	02-10-2003 02:04 PM
cant find 86 gt molding......please help	dragstang86	Windsor Power	5	01-16-2003 11:10 PM
factory alarm question for 1995 mustang gt convertible	chaos	Audio, Security, & Electronics	0	07-27-2002 08:57 PM
2001 Mustang GT VS. Rice Civic	BSchacht6	Stang Stories	2	04-10-2002 09:29 AM
help me me find the perfect mustang	Shuckybrown	Windsor Power	4	04-22-2001 08:16 PM