1984 Mustang L

84MustangL · 03-23-2002, 11:09 PM

Hello,
I have an '84 Mustang L, with a 302 H.O., and a T-50D Transmission, and it seems that I need to rebuild the carb.

How hard is it to rebuild the Holley on this critter?
Thx in advance.

Ponycar_302 · 03-24-2002, 02:54 PM

I have never rebuilt one, so I don't know how hard it would be. I imagine it would be relatively complicated though. Maybe you should consider an alternate route. Jegs sells remanufactured Edelbrock Performer carbs for $185.99. Not a bad deal. Their rebuild kits range from $20-$80, depending on which Holley you have. I probably haven't been much help.

Here is the link, in case you're interested.
http://www.jegs.com/cgi-bin/ncommerc...br=76&lastcat=

Dark Knight · 03-24-2002, 05:13 PM

they arent to hard to do... basic holley... with a few differences... but nothing major

84MustangL · 03-25-2002, 12:15 AM

Thanks for the info, I've rebuilt a Hitachi carb, and it went fairly smoothly, but too many sensors!

Just got through putting a new heater core in, now THAT was a pain!

03-23-2002, 11:09 PM	#1
84MustangL Registered Member Join Date: Mar 2002 Location: Under the Texas Skies Posts: 2	1984 Mustang L Hello, I have an '84 Mustang L, with a 302 H.O., and a T-50D Transmission, and it seems that I need to rebuild the carb. How hard is it to rebuild the Holley on this critter? Thx in advance.

03-24-2002, 02:54 PM	#2
Ponycar_302 Registered Member Join Date: Feb 2002 Location: Pennsylvania Posts: 120	I have never rebuilt one, so I don't know how hard it would be. I imagine it would be relatively complicated though. Maybe you should consider an alternate route. Jegs sells remanufactured Edelbrock Performer carbs for $185.99. Not a bad deal. Their rebuild kits range from $20-$80, depending on which Holley you have. I probably haven't been much help. Here is the link, in case you're interested. http://www.jegs.com/cgi-bin/ncommerc...br=76&lastcat= __________________ I'm sofa king we tall did.

03-24-2002, 05:13 PM	#3
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	they arent to hard to do... basic holley... with a few differences... but nothing major __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Are all 8.8 rears the same?	82 GT	Windsor Power	29	08-23-2004 01:06 PM
t-5, is it the same in the 4 cylinder and V8	ex-lt1-guy	Windsor Power	12	03-03-2002 01:59 AM
89-Mustang pulling trailer -vs- 2000 Mustang	Five0	Stang Stories	7	04-01-2001 02:50 AM
Salaeen, Shelby, Cobra please define these for me.	Taqus	Blue Oval Lounge	3	01-17-2001 02:39 AM

03-25-2002, 12:15 AM	#4
84MustangL Registered Member Join Date: Mar 2002 Location: Under the Texas Skies Posts: 2	Thanks for the info, I've rebuilt a Hitachi carb, and it went fairly smoothly, but too many sensors! Just got through putting a new heater core in, now THAT was a pain!