MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 06-30-2001, 08:40 PM   #1
bada$$lx
Guest
 
Posts: n/a
Question To Nitrous or not to nitrous...that's the ?

? for all you blower and nitrous fans. I've always planned on getting a blower, but lately I've been reading about and listening to some of you juice heads . I'm confused now...I know n20 is the cheaper of the 2, but is n20 as safe as a blower? Which n2o set up would work w/ my combo - check out my current mods and know I'll be upgrading to 1.6 alum rr's and upper/lower rear ctrl arms before taking the power adder step. I'd like to cut a good second off my 1/4 (possibly see 10's w/ a good hook and nice slicks). Thanks in advance!

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts);
30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113)
  Reply With Quote
Old 07-01-2001, 12:12 AM   #2
exgmguy
Registered Member
 
exgmguy's Avatar
 
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
Post

I have been running my dry NOS kit for two years with not a single problem. I only spray 100 hp, so I run premium gas and never even retard the timing from 16 degrees.

I trap 110-111 on motor and 120-122 on the spray. 122 is good enough for a high, high 10 on slicks and a wicked 60 ft.
exgmguy is offline   Reply With Quote
Old 07-02-2001, 06:41 PM   #3
bada$$lx
Guest
 
Posts: n/a
Cool

Thanks exgmguy. High 10's on the bottle sound good to me . I was thinking of running 125 or 150, would that be OK? Not to sound completely n20 naive, but how does it work, when does it work (does the bottle spray automatically at a certain RPM? Do you hit a switch, do you have to hold it in/engage it and switch it off/disengage it? Anyone else???

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts);
30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113)
  Reply With Quote
Old 07-02-2001, 07:06 PM   #4
Stang Runner
Registered Member
 
Stang Runner's Avatar
 
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
Post

On a EFI they hook up to your throttle position sensor you need to arm it frist them!!! I hope to get them very soon to mabe in 2 weeks 150HP is the max on a Stock Block Get a DRY KIT

------------------
1988 LX 5.0 3060lbs (full Tank) 14.90@100.2 On a Gtech Drivetrain: 2.73 Stock Gears (New Gears Are in my house3.55), World Class T-5, Lakewood Bellhousing, Summit Adjustable Cluch Quadrant & Cable, Alumminum Driveshaft, Flaming River Manual Steering Rack Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks
Engine: Steal Mounts, Ram air, K&N, Under Drive Pulles
Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\ba
Stang Runner is offline   Reply With Quote
Old 07-04-2001, 09:27 PM   #5
bada$$lx
Guest
 
Posts: n/a
Cool

I don't think I'd go anything over 150 anyway. Why a dry kit? Nitrous Works, NOS, Nitrous Express? How would I operate it while driving - engage/disengage it...and when? Would 125/150 get me in the low 11's, possibly high 10's? Stangrunner - which kit are you getting?

------------------
'90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts);
30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113)
  Reply With Quote
Old 07-04-2001, 10:05 PM   #6
StUmP1000
Registered Member
 
Join Date: Jul 2001
Location: morristown, tn, usa
Posts: 4
Post

Hey Man, You should definetly put the nitrous on your mustang. There is both a wet shot and a dry shot kit. Neither one is really better than the other. The dry kits are better for stock vehicles. The wet kits are usually better for the cars that have more modifications. On the dry kits you get your extra fuel through the injectors.. which means if you dont use bigs injectors you will most likely lean out and blow a head gasket or even worse. I've been there and done that. If your gonna run a 150 dry shot then i would use 36lb injectors. You can go more than 150 on the wet kits. We run 175 shot on my dads 92 and it takes it fine. We are fixin to go to 200. As long as you keep plenty of fuel you'll be okay. Remember though stock 302 blocks only handle around 600hp max and start giving up.

------------------
StUmP1000 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
nitrous users please read! Simi Stang Windsor Power 12 12-19-2002 02:51 PM
Nitrous times, finally. chris91LX Windsor Power 4 11-11-2002 07:58 PM
Comments on this Nitrous System 93boss Windsor Power 3 03-20-2002 05:19 PM
WOO HOO! RAN NITROUS AT TRACK! (long, real long) bark3rd Modular Madness 26 08-20-2001 08:05 AM
I need a crash course in NITROUS ED Dark_5.0 Windsor Power 7 07-12-2001 06:03 PM


All times are GMT -5. The time now is 06:20 AM.


SEARCH