![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: May 2001
Location: Spring Lake NC 28390
Posts: 19
|
![]() Nedds some help in installing a 351W. I had to purchase a 351 oil pan from PAW with a new pick up and I have dropped the engine in. How Do I wire up the ignition? I took the computer and harness out. Also what is the best way to use the in-tank fuel pump? Any other info on this swap would be appreciated.
------------------ Mike Wigton 89 LX 351W 64 1/2 Convertible |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Oct 2000
Location: Ontario canada
Posts: 446
|
![]() what type of industion are you running carbed or efi ?
If carbed you can reroute the fuel lines and use the mechanical pump as a pusher. AS for the ignition what year and type of distributor do you have? Do you have the ignition moduale or dual points what do you have ? I converted mine with a 351 truck distributor and it just pluuged into the harness but mines injected. ------------------ 89 with 395 single stage n2o and 373's need suspention upgrade |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: May 2001
Location: Spring Lake NC 28390
Posts: 19
|
![]() I have a 600cfm carb. I have the stock distributor and a stock 351 dist. I was hopeing to use the duraspark ignition if possible. I Have the complete harness from the 5.0. If I hooked up the fuel lines to a mechanical pump would it draw fuel from the tank even with the electric pump still in the tank?
Thanks! |
![]() |
![]() |
![]() |
#4 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
![]() That electric pump in the tank is going to give you WAY too much pressure. A mechanical unit will draw fuel from the tank.
|
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: May 2001
Location: Sour Lake, TX
Posts: 211
|
![]() You might be able to use the stock intank pump by installing an adjustable regulator on the fuel line before it goes into the carb. This will alow you to set the pressure and the excess will go back to the tank like the normal efi would.
|
![]() |
![]() |
![]() |
#6 |
Registered Member
Join Date: Oct 1999
Location: Gordonville MO USA
Posts: 448
|
![]() check out //members.boardhost.com/MustangSteve
for a complete how-to & wiring for the Dura spark - you'll need a DS distrib out of a 351. |
![]() |
![]() |
![]() |
#7 | |
Registered Member
Join Date: May 2001
Location: Spring Lake NC 28390
Posts: 19
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#8 |
Registered Member
Join Date: Jul 2000
Location: knoxville,tenn,usa
Posts: 163
|
![]() hey wiggy one thing u might try i took a carbed 302 in a 82 ex 4 banger fuely i went with a holley blue pump with a regulator to calm the pressure down to a carb leve.. i am using a holley 01850-s 600 with vac sec. plus later if i want to add nitr i can and adjust the pressure to go with it....
------------------ 84 lx coupe 75 truck block .030 over trw 10-1 pistons comp magnum 280h .512 .512 lift with 230 duration.. early casting heads 1.94 1.60 valves 58 cc chambers harland sharp rockers 1.6 air gap intake with mild porting holley 600 vac seconderies 2 inch open spacer. built man c-4 with PI 2800 sthall 8.8 strange spool 3.73's moser 31 spline still building the rest going for high to mid 11's |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
just got my 89lx a week ago..tell me what u think! | pepe_la_pew15 | Windsor Power | 8 | 07-10-2004 01:07 AM |
an 89lx notchback..in EXCELLENT condition with 300 hp for $3,200? | pepe_la_pew15 | Windsor Power | 8 | 06-28-2004 09:57 PM |
89lx vs 89gt | Mustang Brandon | Blue Oval Lounge | 10 | 02-18-2004 02:17 PM |
Tranny Problems 89lx | hubiev_89lx | Windsor Power | 4 | 12-18-2001 04:53 PM |
Heavy clutch 89lx | hubiev_89lx | Windsor Power | 4 | 09-06-2001 12:09 PM |