![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Mar 2002
Location: Rockingham,N.C.
Posts: 80
|
![]() I recently istalled a set of march underdrive pullies on my car and deleted the a/c at the same time.I have been having problems with the battery going dead.The gauge shows that at idle the car isn't charging at what it used to but at speed say1800 rpm the gauge is showing above what it used to (on the second line above the half way on the stock ammeter).I thought at first it may be the battery and it still may be its just a cheap economy from advance but I didn't have any charging problems before the pullies.It takes a couplee of days for the battery to go dead .I have charged the battery today and put it back in the car without driving to see if maybe there is a short killikg the battery.I have heard that sometimes the voltage reg. will stick and drain the battery while the car is sitting,any truth to that??Has anyone ever had this problem??Do I need a bigger alt with the pullies ??
__________________
88 Notchback orig. 4 cylinder car with a efi v8 swap from a wrecked 89 5.0 hatch,edelbrock performer rpm's 190/160,typhoon intake,comp cams 1.6 rockers,65mm tb and spacer,pa performance c4 w/ 3000 stall,3.73's auburn pro, 31 spline mosers,mac off road h-pipe,1 5/8 shorties ,and 2 1/2 pro dumps,kirban fpr,190 lph walbrp. SOON TO BE BLOWN! |
![]() |
![]() |
![]() |
#2 |
He said Member...heh, heh
Join Date: Sep 1999
Location: Jupiter, Florida U.S.A.
Posts: 3,718
|
![]() When I put my pulleys on my stock '88 alt. I went through batteries left and right. I finally upgraded to the 130 amp alternator and didn't use the pulley. It's fine now.
__________________
Joe! 1988 GT, 13.58@101mph Check out my listing! Click here! Or my website:www.joe4speed.com |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Jan 2000
Location: greenvile, NC
Posts: 161
|
![]() Yep, underdrives and a stock alt means dead batteries. Some people don't have any problems, most do. Check out http://www.pa-performance.com & http://www.geocities.com/smithmonte/ for more info on the 3g alternator.
__________________
89' Notch Stroked Poked & BLOWN low 11's and it goes around corners too Parts for Sale!! http://www.lowkey.stangnet.com/catalog.html |
![]() |
![]() |
![]() |
#4 |
NX dealer-man
Join Date: Sep 1998
Location: Peoria, Illinois
Posts: 977
|
![]() Upgrading to a higher amp alternator is a VERY good idea. If you do not wish to spend 200+ dollars on a new unit, call March and see how much they want for the overdrive alt. pulley...
Just a suggestion, options are always nice! I ran the stock alt with the overdrive pulley (I believe it was in the neighborhood of $40) with good results for some time until upgrading to a 130 amp unit from Performance Distributors. The PA is cheaper and looks to be just as good if not better than the one I run. Good Luck Oh BTW, factor in a new serpentine belt if needed (Gatorback $40+) and you might consider just buying the alt. now that I think of it... Afterall it's up to you ![]() |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Mar 2002
Location: Rockingham,N.C.
Posts: 80
|
![]() At least now I know I am not alone ,I think I will go ahead and upgrade to a bigger alt. .I have been searching the car up and down for a short glad to know its the pullies.If I just put the stock alt. pulley back on will that do it?
__________________
88 Notchback orig. 4 cylinder car with a efi v8 swap from a wrecked 89 5.0 hatch,edelbrock performer rpm's 190/160,typhoon intake,comp cams 1.6 rockers,65mm tb and spacer,pa performance c4 w/ 3000 stall,3.73's auburn pro, 31 spline mosers,mac off road h-pipe,1 5/8 shorties ,and 2 1/2 pro dumps,kirban fpr,190 lph walbrp. SOON TO BE BLOWN! |
![]() |
![]() |
![]() |
#6 |
NX dealer-man
Join Date: Sep 1998
Location: Peoria, Illinois
Posts: 977
|
![]() It may help some, but I doubt it will cure the problem...
The overdrive pulley that I mentioned worked great until I added a bunch of extra elec. stuff (fan, nitrous system and bottle heater, monster fuel pump, water pump, etc.) I say spend the dough on the 130 amp critter and be done with it... |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
underdrive pulleys and oil pan | CrimsonRacing | Windsor Power | 9 | 05-22-2003 08:45 AM |
Cooling and Charging issues solved(Damn underdrive pullies) | Rick 91GT | Windsor Power | 12 | 08-05-2002 01:49 PM |
Electrical Charging Problem | RED92LX50 | Windsor Power | 3 | 05-30-2002 08:53 AM |
Supercharging...remove underdrive pulleys?? | quick89gt | Windsor Power | 4 | 04-03-2001 10:15 PM |
Underdrive performance W/O alt. pulley. | Shotgun28 | Windsor Power | 16 | 02-04-2001 11:24 AM |