how much power????

powerdyne 5.0 · 02-17-2004, 10:41 PM

I have a 93 lx with the following mods, powerdyne 9lb kit,24 lbs injectors, 77 pro-m, 75 t-body, 190lph fuel pump, mac headers,bbk x-pipe, flowmaster catback, underdrive pulleys, electric fan, and some type of cam, not sure what it is?? i think its a e cam. Thanks

GhOsT6_9 · 02-18-2004, 04:23 PM

Well lets look into the magical crystal ball.... I'm guessing at around 290-330hp.

Just take it to the track and see what it run in the 1/4 or 1/8. Those numbers are the only ones that matter anyways.

sedanman · 02-18-2004, 06:38 PM

I am gonna guess 275 at the tires (if its a stick).

Also how do you have underdrive pullies and a blower?

powerdyne 5.0 · 02-18-2004, 09:53 PM

The last time i ran it, it ran mid 13's but that was with only 5-6psi b/c of a boost leak and the clutch was sliping a little. This summer i plan to get heads,intake,blower cam, rockers,etc.

Dark_5.0 · 03-02-2004, 04:58 PM

You should put about 300 to the ground IMO.

exgmguy · 03-14-2004, 07:17 PM

I have a similar set up as yours except I have slightly worked stock heads (does not matter much, they are garbage anyway) and an Edelbrock performer intake. I make about 11 psi with my BD11-A.
My engine is also 10 to 1.
I pulled a particular LS1 car that I know by about 3 cars from a roll in just 3rd gear. He runs high 12's at 108-109.

You can make a bit over 300 at the wheels with your set-up, but it really depends on the tune. Blower cars can be real dogs if they are not tuned right.

PWR_RYD93 · 03-17-2004, 02:07 PM

Quote:

Originally posted by exgmguy

You can make a bit over 300 at the wheels with your set-up, but it really depends on the tune. Blower cars can be real dogs if they are not tuned right.

Absolutely correct. It's amazing the difference adding a couple of degrees of timing and subtracting a few % fuel can make. I'd say with a decent tune 300+ is very possible.

leathal injection · 03-25-2004, 08:54 PM

I WOULD SAY UR PUTTING 275-290 TO THE FLYWHEEL.
PUT A SMALLER PULLY ON BLOWER...... IF YOUR BOTTOM END IS IN FAIR CONDITION, U SHOULD BE ABLE TO RUN 12-14 PSI.

Ackbar00 · 03-26-2004, 08:06 AM

Quote:

Originally posted by powerdyne 5.0
The last time i ran it, it ran mid 13's

What was the Trap speed?

02-17-2004, 10:41 PM	#1
powerdyne 5.0 Registered Member Join Date: Feb 2004 Location: alpharetta,GA Posts: 19	how much power???? I have a 93 lx with the following mods, powerdyne 9lb kit,24 lbs injectors, 77 pro-m, 75 t-body, 190lph fuel pump, mac headers,bbk x-pipe, flowmaster catback, underdrive pulleys, electric fan, and some type of cam, not sure what it is?? i think its a e cam. Thanks __________________ 93 white lx, tko, 3.55, powerdyne 9lb, pulleys, mac headers,bbk x-pipe,flomaster,24lb injectors,77 mass air,75 t-body

02-18-2004, 04:23 PM	#2
GhOsT6_9 Registered Member Join Date: May 2000 Location: Ontario,Canada Posts: 233	Well lets look into the magical crystal ball.... I'm guessing at around 290-330hp. Just take it to the track and see what it run in the 1/4 or 1/8. Those numbers are the only ones that matter anyways. __________________ 1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH

02-18-2004, 06:38 PM	#3
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	I am gonna guess 275 at the tires (if its a stick). Also how do you have underdrive pullies and a blower? __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

02-18-2004, 09:53 PM	#4
powerdyne 5.0 Registered Member Join Date: Feb 2004 Location: alpharetta,GA Posts: 19	The last time i ran it, it ran mid 13's but that was with only 5-6psi b/c of a boost leak and the clutch was sliping a little. This summer i plan to get heads,intake,blower cam, rockers,etc. __________________ 93 white lx, tko, 3.55, powerdyne 9lb, pulleys, mac headers,bbk x-pipe,flomaster,24lb injectors,77 mass air,75 t-body

03-02-2004, 04:58 PM	#5
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	You should put about 300 to the ground IMO. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

03-14-2004, 07:17 PM	#6
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	I have a similar set up as yours except I have slightly worked stock heads (does not matter much, they are garbage anyway) and an Edelbrock performer intake. I make about 11 psi with my BD11-A. My engine is also 10 to 1. I pulled a particular LS1 car that I know by about 3 cars from a roll in just 3rd gear. He runs high 12's at 108-109. You can make a bit over 300 at the wheels with your set-up, but it really depends on the tune. Blower cars can be real dogs if they are not tuned right. __________________ 1988 Mustang GT stock bottom 302, C4 10.9 @ 128 with 8 psi of Novi 1000 boost!----STOLEN 1989 Mustang notchback Warmed up 306 with a Procharger.

03-25-2004, 08:54 PM	#8
leathal injection Registered Member Join Date: Mar 2004 Location: Long Island Posts: 58	I WOULD SAY UR PUTTING 275-290 TO THE FLYWHEEL. PUT A SMALLER PULLY ON BLOWER...... IF YOUR BOTTOM END IS IN FAIR CONDITION, U SHOULD BE ABLE TO RUN 12-14 PSI. __________________ 1990 Mustang GT Engine- 308 (bored .40 over) Probe Forged pistons (10.5:1), Scat forged crank and rods, w/Main Girdle, AFR 185 heads, GT-40 intake, CSI electric water pump. AC delete kit, No smog pump, Manual rack and pinion steering. Ignition- MSD 6AL, MSD Blaster coil, MSD hellicore wires. Drive Train- Tremic 3550, Alum. Drive shaft, 3:73 gears, Stock carrier and axels. 26X11.5 M/T Et streets. Power adder- 175 shot of laughing gas. Best ET 11.5 @120mph on squeeze, 12.4 @109mph on muscle (on gt40 heads) on the 185 heads ... ??? tba

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Power steering	RDRZ	Classic Mustangs	0	03-02-2004 07:53 PM
power for 500 hp daily	Torinalth	Power Adders	22	09-25-2003 11:54 PM
Lost top end power	bobtodd	Windsor Power	11	08-01-2002 10:28 PM
power shift?	JamGtStang	Windsor Power	6	03-01-2001 02:11 PM
Electrical power, where to splice?	Chris_H	Windsor Power	3	02-11-2001 08:29 PM