Is there a difference between exploerer injectors and mustang injectors?

Agent_4573 · 12-10-2002, 01:59 PM

I bought a gt40 upper/lower intake from a 99 explorer 302 and it came with the fuel rail and set of injectors. I was wondering if they were the same injector and if in the future i could switch them out if mine went bad. Also, and i guess this falls under the same injector question, if i can use them, ,are they 24# or 19#?

chickendreamer · 12-10-2002, 08:35 PM

I believe the injectors are color coated from the factory,,, off hand I don't know the colors though, sorry.

USMC302 · 12-10-2002, 09:17 PM

Quote:

I believe the injectors are color coated from the factory,,, off hand I don't know the colors though, sorry.

orange = 19lbs
blue = 24lbs
red = 30lbs

Quote:

could switch them out if mine went bad

I believe so and I believe they are 19lbs in the explorer, same as the mustang

Agent_4573 · 12-10-2002, 10:32 PM

See thats the problem i'm having... there a light beige color.

drtbiker · 12-10-2002, 11:02 PM

ask pkrwud he should now, i think they are 19lbs injectors but i could be wrong...
later

12-10-2002, 01:59 PM	#1
Agent_4573 Registered Member Join Date: May 2002 Location: New Jersey Posts: 375	Is there a difference between exploerer injectors and mustang injectors? I bought a gt40 upper/lower intake from a 99 explorer 302 and it came with the fuel rail and set of injectors. I was wondering if they were the same injector and if in the future i could switch them out if mine went bad. Also, and i guess this falls under the same injector question, if i can use them, ,are they 24# or 19#? __________________ '89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression. If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout. RICER HATERS CLUB MEMBER 87! www.ricehatersclub.com

12-10-2002, 08:35 PM	#2
chickendreamer Registered Member Join Date: Jun 2002 Location: Edmonton, Alberta, Canada Posts: 53	I believe the injectors are color coated from the factory,,, off hand I don't know the colors though, sorry. __________________ Chicken Dreamer 1995 Mustang GT

12-10-2002, 10:32 PM	#4
Agent_4573 Registered Member Join Date: May 2002 Location: New Jersey Posts: 375	See thats the problem i'm having... there a light beige color. __________________ '89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression. If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout. RICER HATERS CLUB MEMBER 87! www.ricehatersclub.com

12-10-2002, 11:02 PM	#5
drtbiker Registered Member Join Date: Jan 2002 Location: Mt. Prospect,IL Posts: 474	ask pkrwud he should now, i think they are 19lbs injectors but i could be wrong... later __________________ 87-ford-mustang-SOLD! mods: 3:73's, off road h-pipe, b303 cam in gt- 40 motor w/ Power Plus intake, edelbrock 70mm tb & egr spacer, 72mm C&L, bbk long tubes, tremec tranny, centerforce dual friction clutch, upr and lwr CA's 255lph FP and soon more to come.... when i have money again SOME ADVICE Don't do burn outs in reverse it is very expensive New times with dead hook on dr's 13.27@103 with 2.0 60 foots w/100lb system Fastest time to date: 12.8@113

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
differences in injectors?	'89GTStang	Windsor Power	9	06-06-2003 02:39 AM
Salaeen, Shelby, Cobra please define these for me.	Taqus	Blue Oval Lounge	3	01-17-2001 02:39 AM