Trans ID Question

zach0 · 01-09-2007, 11:15 AM

I bought a 5 speed Tremec and was told it was out of a 01' GT Mustang which I am guessing had the 4.6 motor. I am trying to find out some more info on it so I can try to find a bell housing for it to fit on to a 302. I have looked around on the internet and come up with nothing. Any help is appreciated.

This is the tag thats on it.

XR3R-7003-AB RES AB 1002
1381-011 038372

1989GT · 01-09-2007, 12:00 PM

That looks like the part # for a t-45, which won't mate up to a 302. They have an integral bellhousing, so there's no way to swap the bellhousing to something that would fit a 302.

blue00gt · 01-11-2007, 03:30 PM

Is the bellhousing on your tranny bolted on or is it all one piece with the case?

01-09-2007, 11:15 AM	#1
zach0 Registered Member Join Date: Apr 2001 Location: Hampton, Virginia Posts: 227	Trans ID Question I bought a 5 speed Tremec and was told it was out of a 01' GT Mustang which I am guessing had the 4.6 motor. I am trying to find out some more info on it so I can try to find a bell housing for it to fit on to a 302. I have looked around on the internet and come up with nothing. Any help is appreciated. This is the tag thats on it. XR3R-7003-AB RES AB 1002 1381-011 038372 __________________ 1980 RX7 with 289 Ford V-8 bored .030 over, Very radical cam, Torker 2 high rise intake, Holley 650 Carb, MSD Nascar 6ALN ignition, MSD coil and distributor, Headers with dual open side exhaust. Over 300 horse. 1966 Mustang still in progress

01-09-2007, 12:00 PM	#2
1989GT Registered Member Join Date: Apr 1999 Location: Cincinnati,OH Posts: 1,511	Re: Trans ID Question That looks like the part # for a t-45, which won't mate up to a 302. They have an integral bellhousing, so there's no way to swap the bellhousing to something that would fit a 302. __________________ 89GT,Pro-Bullet 306, H/C/I and a bunch of other stuff. Sold 00GT, Vortech S-Trim, Steeda Boost Pipe, C&L intake, Mac off-road H-pipe, Flowmasters, B&M Ripper shifter, Eibach Sportline springs, Koni Struts/shocks, MM full length subframe connectors, Cobra brakes, 3.73's. My Car Domain Page

01-11-2007, 03:30 PM	#3
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Re: Trans ID Question Is the bellhousing on your tranny bolted on or is it all one piece with the case? __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
trans question	zeppi	Classic Mustangs	2	06-02-2005 09:21 AM
Trans part question of the day	stangt00	Modular Madness	1	01-26-2003 09:49 AM
Auto Trans Question	93CougarXR7	Windsor Power	2	08-04-2002 02:10 PM
Auto Trans Cooler Question	NewStang02	Small Ponies	2	06-18-2002 07:58 PM
trans mount question, need opinions	avbcon12	Windsor Power	6	04-07-2002 09:09 PM