© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-11-2002, 01:57 PM | #1 |
Registered Member
Join Date: Nov 2001
Location: Sunny, Hot, Sebring, Florida
Posts: 725
|
Quickest Stocker you know
I have run a best of 12.82 @ 104mph with bone stock heads, cam, and intake, with a lot of bolt-ons and slicks. In my area that is top dawg as far as a stocker. I've worked hard for this, am I fast for a stocker or no?
__________________
Remember...2nd place is 1st place for losers! |
04-11-2002, 04:07 PM | #2 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
How are you getting 104 with unported heads? I just found out my car weighs 3120 with me in it, and some tools, thats why my car is a quick stocker, well i say its quick, not 12.80 quick, i feel with some better headers, and 1.7 rr's i could hit 13.3 with slicks.
and with some decent grs and a hard launch on real slicks, not e.t. streets i think i can get a 13.2 out in some good weather, last night my car ran crappy
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
04-11-2002, 04:21 PM | #3 |
Registered Member
Join Date: Nov 2001
Location: Sunny, Hot, Sebring, Florida
Posts: 725
|
Coupe5oh, well, I don't know exactly how I'm getting 104mph out of unported heads, I've always looked at it in a TOTAL PACKAGE view point, and to me E.T is what matters, MPH is, as you know only indicative of horsepower. I'm a drag racer, getting to the finish line first is my only goal. 13.20's are easily achieved in hot/sticky weather for me.
Looking at your spec's, I offer the following advice in true sportsmanship. Auto or Manual I knock the 3.27's. 160 stat is open constantly, tricking puter rich. 10" tires, too much, too heavy, 8.5 is plenty. I run 1.6's on the intake side, 1.7's on the exhaust, this keeps up velocity in the valve workings, Ford's DO NOT LACK intake speed or duration, ONLY exhaust, a common mistake.
__________________
Remember...2nd place is 1st place for losers! |
04-11-2002, 04:57 PM | #4 |
Registered Member
Join Date: Jun 1999
Location: Walker, MI, USA
Posts: 1,202
|
I have heard about the 160 being open all the time I have a 160 And it Dont hardly open all the timewhen I am moving I am not Sure it every really opens Stays about 140-150 when Moving thats using the stock Gauge not sure how good that is but the frist Mark is where it stays Will be getting AutoMetter soon
__________________
Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm |
04-11-2002, 05:04 PM | #5 |
Registered Member
Join Date: Apr 2000
Location: middleburg, fl, usa
Posts: 1,134
|
The fastest I ever got in a stocker was a 13.4 @105mph in an 88 gt on street tires. I have no idea what I could have done with some traction.
It had the stock intake and stock heads but the intake was heavly ported and the heads were mildly ported on the exhaust side. 3.55 gears, chip, race pulley, dynomax mufflers, gutted cats, k&n, and tractoin bars. No a/c or smog. The best 60 ft was a 1.9? but the norm was around a low 2.0.
__________________
James Cox RHC Member #44 nochevy@hotmail.com 1991 Mustang LX Dart iron eagle block, 4340 28oz 347 crank, 4340 h-beam rods, probe ultra light pistons canfield heads “race ported by Brent Frazier”, solid roller cam and lifters “custom grind”, kooks 1 7/8" race headers, and much more. Engine built by Brent Frazier. |
04-11-2002, 06:04 PM | #6 |
Registered Member
Join Date: Nov 2001
Location: SanAntonio, Tx
Posts: 734
|
Well the 195 stat was way too warm, my car would be sluggish on the track, i would have to allow 1-2 hr cool down times, the 160 does run a bit rich, but you want to be a little rich, rather lean at wot? It makes more power, your right these tires are heavy, but they do not make an 8.5 e.t. street, just a real slick, in which im gonna get for my old rims, i know a big problem is the gears, but all in all, my car runs good for a higway running daily driver....
about the 1.6 on intk, and 1.7 on exhaust, i never heard of that, although i can see how it would work, did you have to buy two sets of rockers? $$$
__________________
Police package 5spd 90 Lx, Stock original motor, 3.27grs, BM fan, fms 10.5 clutch, D&D quadrant, and adjuster, ADS chip, 180 stat, mac cai, mac h-pipe, mac subframe connectors, ASP crank pulley, ripper shifter, 26x10.5 M/T sport pros welds. 246 hp according to analyzer Race weight: 3,120 E.t-13.57 with 26x10.50's e.t. streets. 1.88 60' mph- 99.92 mph |
04-11-2002, 06:48 PM | #7 | |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: Quickest Stocker you know
Quote:
Later,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
|
04-11-2002, 10:42 PM | #8 |
Registered Member
Join Date: Aug 2001
Location: Genoa,IL
Posts: 79
|
Thats not "STOCK"....thats modified!!! Lets talk ...no work done the heads or intake, TB, mass air, roller rockers, or cam..??? lets hear about that.
|
04-11-2002, 11:12 PM | #9 |
Registered Member
Join Date: Jul 2001
Location: Taxachusetts
Posts: 374
|
14.0x.
BONE STOCK. |
04-12-2002, 08:57 AM | #10 | |
or '331 LX Eric'
Join Date: Jan 1999
Location: Columbus, Ohio
Posts: 2,142
|
Quote:
Still 12.80's @ 104 is hard to believe out of stock heads (untouched), cam, intake, etc. Just my opinion, not flaming. E
__________________
1991 5.0 LX Coupe - 40,750 miles 331 cu. in. / Tremec 3550 / BFG Drag Radials 12.22 @ 114.31 mph - w/1.89 60' |
|
04-12-2002, 09:31 AM | #11 | |
Registered Member
Join Date: Aug 2001
Location: Genoa,IL
Posts: 79
|
Quote:
|
|
04-12-2002, 10:09 AM | #13 |
Registered Member
Join Date: Jul 2001
Location: Taxachusetts
Posts: 374
|
Check the sig.
It was a total fluke. After I get my exhaust done, and with the cold-air kit and bumped timing, I'm betting I won't crack 14.5. My 60ft was under 2 seconds, but I don't remember exactly what. I lost the damn timeslip. Probably a 1.9.
__________________
Stripped-down '93 LX Coupe -- "Danielle" R.I.P. 05/30/02 "I've seen some crazy stuff in my life, but that...was...AWESOME!!! Oh, sorry about your car, man." |
04-12-2002, 10:33 AM | #14 |
Registered Member
Join Date: Aug 2001
Location: Genoa,IL
Posts: 79
|
Well...heres my story...92 lx nothing taken out of it!!!
List of Parts: Tune-up with wires,Msd coil.just regular oil no tricks Bumped timing K&N Pullies X-pipe w/o cats...stock mufflers Street tires--Yokahama's Stock gearing Thats it.....with belt on...14.88@95....belt off....14.66@96...track was very poor!!!....2.2 60ft Oh ya...car weights in at 3440 w/ me {170} |
04-12-2002, 10:45 AM | #15 |
Registered Member
Join Date: Jul 2001
Location: Taxachusetts
Posts: 374
|
"belt off"? You took your serpentine belt off?
|
04-12-2002, 10:59 AM | #16 |
Registered Member
Join Date: Aug 2001
Location: Genoa,IL
Posts: 79
|
Yes I did...just for the run...need to bring it with and the tool..yes one tool to put it back on..after the run...And it will lower your time!!!!
with the belt on...it runs through all the norm plus A/C and smog pump....sucks the power right out!!! |
04-12-2002, 12:04 PM | #17 |
Registered Member
Join Date: Nov 2001
Location: Sunny, Hot, Sebring, Florida
Posts: 725
|
Okay guy's here's the 12.82 @ 104 package, this is no joke, I am not lying or twisting facts whatsoever, This was a single best pass, with consistant 12.90's in the fall, and it went 13 "teens" in the Summer.
1993 Hatch 5-speed, full interior w/ A/C. 3440 lbs with me, one 90lb. bag of concrete in the rear. (Had to sneak the bag in at last minute and cover it at the track) 12" K&N, not in the wheel well. 73mm C&L (19lber's still) Speed density inlet tube 65mm T.B., 67mm egr spacer (home port) March pullies Hurst shifter BONE STOCK UNTOUCHED HEADS, CAM, INTAKE 1.6 RR's on intake, 1.7 RR's on the exhaust. 1 & 5/8" Long tubes 2 & 1/2" H-pipe 2 Chamber flows dumped Subframe connectors Aluminum driveshaft 3.73 gears Stock Trac-lok H.D uppers Southside lowers (yuk!) 26 X 8.5 M.T. slicks AT THE TRACK Quarter tank 87 octane, what! 87!, yes, not 89 or 93 Remove front sway bar (never remove the rear one, untill 11's) Short belt Engine torque strap March race crank pulley Battery in the rear 90 - 180 lbs. concrete in the rear This car was in always an excellent state of tune, I just drive well, and pulled off a great pass, thats it. YOU CAN TOO!!!!!!!!
__________________
Remember...2nd place is 1st place for losers! Last edited by gtsr515; 04-12-2002 at 12:11 PM.. |
04-12-2002, 01:55 PM | #18 |
Registered Member
Join Date: Jul 2001
Location: Taxachusetts
Posts: 374
|
OUTPLAYN: You could probably run even faster than that if you brought a short belt. An EFI car kind of needs an alternator.
|
04-12-2002, 04:36 PM | #19 | |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Quote:
I believe you.....Very impressive I might try the cement thing at the track tomorrow night. Later,
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
|
04-12-2002, 04:55 PM | #20 |
Registered Member
Join Date: Feb 2001
Location: Stockton, Ca
Posts: 599
|
I had been thinking of that very same idea of putting 1.6 rr on the intake and 1.7 on the exhaust. Kinda got it from the edelbrock camshaft profiles. I wonder what mine will run with this mild set up I'm building.
ported and polished upper and lower intake opened to 67mm ported and gasket matched e7 heads full length 1 5/8 headers 65 mm tb no accesories just alternator and pump cold air intake set up 73 mm MA windage tray crank scraper 5 speed maybe a 3.80 rear 1.7 rr unless I can find someone with 1.6'rs that wants to do a half trade. Its all going into the fastback should be interesting let me know what you guys think
__________________
67' Fastback-Supercharged 4.6 DOHC Cobra, T-56, 8.8 more to come. 67' Coupe-EFI, AOD, 8.8 90 Gt-Supercharged,MAF,TB,1.7's ripper, bassani x, 3.55's, 01' cobras, headers. 89'GT-Supercharged,Heads,Cam,Intake,TB,MAF,power pipe,headers,offroad exhaust,black bullits. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wore out 2 CRX's with a stocker.....LOL | JaxTheDJ | Stang Stories | 3 | 04-08-2003 03:59 PM |
Quickest way to 600 with a 429? | OneBad91 | Windsor Power | 7 | 03-07-2003 11:09 PM |
Quickest 4.6 Cobra? | gtsr515 | Racer's Club House | 0 | 06-01-2002 05:51 PM |
What's the quickest car that you have ever ridden in? | TJR | Blue Oval Lounge | 47 | 02-11-2002 09:45 AM |
13s with a stocker, Bull**** | Mean50 | Windsor Power | 50 | 05-01-2001 07:38 PM |