Wanna go REALLY fast?

SkarodoM · 06-29-2001, 11:52 PM

Well.. we've got a couple pro-stock truck motors sitting at Jerico

That crazy mofo roy hill (roy hills drag school) had them. I believe they were 398's, theyve both got aluminum SVO blocks... dont have spec sheet so dont know what heads, sheet metal intake with a couple barry grant dominators... the usual BS like drysump, motorplate, elec csi WP..

Should both make 900hp. I dunno how much theyve been run, but we wouldnt have bought them if it was much. I believe theyre gonna get torn down, inspected and dynoed. just dont know for sure yet since they showed up today.

Also... these werent in the trucks that 'students' learn on.. those ford trucks actually have GM 502's in them so they arent quite as high strung

lol... anyone? I know i'm not about to spend more on a motor than i did on my car

phil@jericoperformance.com if ya seriously want info

93CobraR · 06-30-2001, 08:03 PM

I'll take both of them!

Have them overnighted please!

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.759
Best MPH 106.79
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

SkarodoM · 06-30-2001, 10:28 PM

Youre going to be surprised when you get a COD for $85,000 arent you

bigwhitecobra · 07-02-2001, 06:35 PM

$85,000?!?!?!?!?!?! Is that all? I'll take 6!!!! Load'em up in that little Z of yours and bring'em by here. Maybe then I can run with ya!! Heh heh. Thursday?

------------------
The Black Mamba 11.2@124
1994 Cobra
'00 Focus ZTS- K&N drop in. 10.66@66mph 1/8mile

theforce · 07-02-2001, 10:53 PM

If your going to play. You got to pay.

------------------
93 LX 331 cu.in. T Trim Canfields Stage III Richmond 6 speed

SkarodoM · 07-03-2001, 12:43 AM

good god Roy must be hurting for money

I dunno what jerry paid for them...... but he'll sell them for $25,000 each. Thats cheap.

One is a 390, one is a 40X. Both made ~915hp and 600lb-ft on the dyno.

Any suggestions as to where one could post this for sale? I know of a few drag forums but they focus on stock/superstock.

thx

Thursday! Thursday! Thursday!

bigwhitecobra · 07-05-2001, 11:43 AM

Well, there's always E-Bay.......I guess.

I was hoping to have the tranny ready in the Cobra, and the GT........well, let's not go there, but I am still going to go to the track tonight(7-5-01). Can I run your car once Phil? I am in serious need of raw horsepower. I figure who better to ask than you? You know, since you have the big bad 'Maro! Ok, I'm done rambling. Later.

SkarodoM · 07-05-2001, 01:59 PM

Can you drive it? Yes.

Can you run it? No.

hehe.. honestly i'm afraid to run it on slicks again til i get the 9" together. That pos gm 10bolt is creaking...

SkarodoM · 07-05-2001, 02:02 PM

I did get bored and take a few pictures of the foolish things...
www.jericoperformance.com/phil/pics/

the pics that start with PS are the ones... the others are some weird *** friend ; )

bigwhitecobra · 07-05-2001, 03:21 PM

Heh heh, Yeah, I'd be a bit worried too. That much power on a stock rear end is trouble waiting to happen. Well, with slicks anyway. I'd offer to let you drive the Focus, but...uh....you won't like it. Not enough power, yet. Later man.

06-29-2001, 11:52 PM	#1
SkarodoM Registered Member Join Date: Mar 2001 Location: Charlotte, NC Posts: 199	Wanna go REALLY fast? Well.. we've got a couple pro-stock truck motors sitting at Jerico That crazy mofo roy hill (roy hills drag school) had them. I believe they were 398's, theyve both got aluminum SVO blocks... dont have spec sheet so dont know what heads, sheet metal intake with a couple barry grant dominators... the usual BS like drysump, motorplate, elec csi WP.. Should both make 900hp. I dunno how much theyve been run, but we wouldnt have bought them if it was much. I believe theyre gonna get torn down, inspected and dynoed. just dont know for sure yet since they showed up today. Also... these werent in the trucks that 'students' learn on.. those ford trucks actually have GM 502's in them so they arent quite as high strung lol... anyone? I know i'm not about to spend more on a motor than i did on my car phil@jericoperformance.com if ya seriously want info

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanna have a fast car.	Dark_5.0	Blue Oval Lounge	14	11-19-2003 04:28 PM
FAST vs. Chip	STEEDAJEFF	Windsor Power	1	09-29-2002 02:16 PM
Are these fast??	Dark_5.0	Stang Stories	13	05-16-2002 01:19 PM
Super cars and Fast and the Furious	#1 Pony	Blue Oval Lounge	9	01-29-2002 12:54 AM
Pesky Supra, actually thought he had a fast car.	Unit 5302	Stang Stories	7	03-20-2001 01:34 PM

06-30-2001, 08:03 PM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	I'll take both of them! Have them overnighted please! ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.759 Best MPH 106.79 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

06-30-2001, 10:28 PM	#3
SkarodoM Registered Member Join Date: Mar 2001 Location: Charlotte, NC Posts: 199	Youre going to be surprised when you get a COD for $85,000 arent you

07-02-2001, 06:35 PM	#4
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	$85,000?!?!?!?!?!?! Is that all? I'll take 6!!!! Load'em up in that little Z of yours and bring'em by here. Maybe then I can run with ya!! Heh heh. Thursday? ------------------ The Black Mamba 11.2@124 1994 Cobra '00 Focus ZTS- K&N drop in. 10.66@66mph 1/8mile

07-02-2001, 10:53 PM	#5
theforce Registered Member Join Date: Jun 2000 Location: Deer Park (Houston), Texas Posts: 39	If your going to play. You got to pay. ------------------ 93 LX 331 cu.in. T Trim Canfields Stage III Richmond 6 speed

07-03-2001, 12:43 AM	#6
SkarodoM Registered Member Join Date: Mar 2001 Location: Charlotte, NC Posts: 199	good god Roy must be hurting for money I dunno what jerry paid for them...... but he'll sell them for $25,000 each. Thats cheap. One is a 390, one is a 40X. Both made ~915hp and 600lb-ft on the dyno. Any suggestions as to where one could post this for sale? I know of a few drag forums but they focus on stock/superstock. thx Thursday! Thursday! Thursday!

07-05-2001, 11:43 AM	#7
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	Well, there's always E-Bay.......I guess. I was hoping to have the tranny ready in the Cobra, and the GT........well, let's not go there, but I am still going to go to the track tonight(7-5-01). Can I run your car once Phil? I am in serious need of raw horsepower. I figure who better to ask than you? You know, since you have the big bad 'Maro! Ok, I'm done rambling. Later.

07-05-2001, 01:59 PM	#8
SkarodoM Registered Member Join Date: Mar 2001 Location: Charlotte, NC Posts: 199	Can you drive it? Yes. Can you run it? No. hehe.. honestly i'm afraid to run it on slicks again til i get the 9" together. That pos gm 10bolt is creaking...

07-05-2001, 02:02 PM	#9
SkarodoM Registered Member Join Date: Mar 2001 Location: Charlotte, NC Posts: 199	I did get bored and take a few pictures of the foolish things... www.jericoperformance.com/phil/pics/ the pics that start with PS are the ones... the others are some weird *** friend ; )

07-05-2001, 03:21 PM	#10
bigwhitecobra Huh? Whatcha said? Join Date: Oct 2000 Location: Fayetteville, NC Posts: 1,073	Heh heh, Yeah, I'd be a bit worried too. That much power on a stock rear end is trouble waiting to happen. Well, with slicks anyway. I'd offer to let you drive the Focus, but...uh....you won't like it. Not enough power, yet. Later man.