Accufab TB questions - Where to buy, what size, etc.

[2FastLX]

I am going to order an Accufab TB next week and need to know what size you guys recommend for this setup...
90 LX 5.0 with:
GT-40 intake
76mm MAS with 24lb injectors
Stock E7 heads which will be ported and polished and new hardware installed with upgraded springs to match cam
Mild to moderate cam (still deciding and looking for suggestions)
Roller rockers - ratio depending on cam
Full MAC exhaust with long tubes and a pro chamber off road crossover
Underdrive pullies
Cold air kit
3.73 gears
Electric fan (soon)
MSD 6AL ignition and Blaster coil coming soon as well.

I plan on getting a set of AFR 165 heads this summer, which will be my next purchase after all this stuff, but for now the ported stockers are going to have to do. Would a 70mm be too big for me? Or should I go with a 65mm? I would have to machine the intake to match the 70mm too I think. I plan to add NOS and maybe a Turbo sometime down the road.

And most importantly, where is the best place to buy Accufab TB's?

[Rick 91GT]

I think a 65mm would better suit your combo, and since you won't be turning real high rpms where the 70mm would really help and come on.

I bought mine from The Power Source it is a 65mm, It was on the car for 2800 miles and is like new, I paid $270.00 for the TB and spacer. I would like to upgrade to the 70mm so if you make me a deal I can't refuse it your's...I'll pay shipping.

Rick
8-5 M-F (rhawver@strouse.com)
after 5 and weekends (Rick91GT@onemain.com)

------------------
My Ride (http://www.mustangworks.com/cgi-bin/Viewlt.cgi?http://www.mustangworks.com/cgi-bin/moi-display.cgi?853) Check Out My Site (http://members.mustangworks.com/rick91gt/index.html) 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98