94 cobra seat install!

[rwhite65]

What kind of modifications are you having to do to the car to get those seats to fit in there?

[stanger66]

Do you know how to fix the cowl because I know mine leaks because I found out the hard way. I took the car wash and I found all my leaks (front and rear windows, side windows-all,cowl,heating tubes,doors,trunk) and there is nothing like getting sprayed in the face by a high pressure spray and swimming in the floor boards and punching a drain hole in the trunk to drain it. I'm sure the gas station had problems with the vaccuum later I made it into a wet/dry vac sucking the water from the interior.hehehe

[bmxmon]

Originally Posted by rwhite65

What kind of modifications are you having to do to the car to get those seats to fit in there?

Nothing too hard at all actually. (nothing to the car itself if you didnt want too)<-edit I lucked out and the rails are equal distance apart, old vs new. Here is a link to a write up I did: http://www.cmbracing.com:5599/late&#37;2...20install.html I still have yet to buy another manual frame rail to install the other one, plus I still need to lower the pedestals for a better ride height. (they sit just slightly too high for my tastes.) I was going to do that last weekend, then ran into my floor problem and decided to deal with that first. Not sure if I will be able to get around to it this weekend either, helping some friends move.
(added a pic of one of the seats with the headrest off)

Originally Posted by stanger66

Do you know how to fix the cowl because I know mine leaks because I found out the hard way. I took the car wash and I found all my leaks (front and rear windows, side windows-all,cowl,heating tubes,doors,trunk) and there is nothing like getting sprayed in the face by a high pressure spray and swimming in the floor boards and punching a drain hole in the trunk to drain it. I'm sure the gas station had problems with the vaccuum later I made it into a wet/dry vac sucking the water from the interior.hehehe

I've personally never done it, but I believe i will be in the future! Here is the good site I was talking about: http://www.mustangmonthly.com/howto/75438/ Sounds like you may have it worse than mine. (cant top my buick though) Air and water leaks are the worst part about classic cars.

[stanger66]

That cowl repair looks like a pain in the ass for someone that has never done it before. I think I might someone else do this for me. I dont do bodywork that great.

That floor pan looks like fun for you to do. Loved the patch job previous owner did. looks like it used to be a sign.lol

[bmxmon]

Figured I'd give you guys an update, its been awhile... I have both the drivers and passengers side replaced, though both still need more welding. (Passengers side only has several tack welds) Definately took longer than I expected, though I havent really put that much time into it, just finding that time lately has been pretty tough. After I get all the welding done I'll grind it all smooth, put a healthy dose of epoxy on it, then some new sound deadener and put it back together!! On a side note I also have pretty much all the parts to get my t5 in finally, so once the floors are done that will be next, along with my electric fan. I actually have a decent paying job now, so its been nice to be able to order new parts.
_______
Also, does anybody know a good way to recondition black leather seats, the grey stress marks make them look pretty bad to me...