toploader for sale
 

I have a top loader out of a 65 mustang, the car was wrecked in 1967 the transmission was installed behind a 260 falcoln for several years was taken out about 1974 and hasn't been behind an engine sence then. All the gears are factory and are extremly low millage, I have had this transmission sence I bought it in 1967. It still shifts like a dream. Has original mustang shifter, but needs a new handle, 1 joke in excilent condition and another just for keeping it clean. The drive shaft that the other joke is attached is out of a 1969 Torino. Asking $1000 for all of it.

#1 Please fill in your location.

#2 Does it have a ID tag. If so, what is the number?

#3 Is a wide ratio, or close ratio. Count teeth on the second gear. 28 is wide, 31 close.

#4 Is the case 24, 25.5 or 27 inches long.

#5 How many spline are on the input shaft.

#6 Bell housing?

Reason I ask is there is about 37 different types of loaders.

1. done
2. yes it has an ID tag: RUG E 016830
3. wide
4. 24 inches
5. 10 splines
6. no bellhousing

sorry i've been out and hadn't had a chance to reply to this post