what parts to I need to beat a SS Camaro
 

I'm thinking of buying a 92 GT 5-speed. What parts do I need to beat a 2000 Camaro SS auto. A blower is out of the question. I'm also straped for cash. Thanks

------------------
1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"
http://cwm.ragesofsanity.com/s/net2/burnout.gif

If it ain't broke, you ain't tryin hard enough

If you're strapped for cash, you're in big trouble. Someone should be able to help you but my uneducated guess would be that you, at the very least, need a 150 shot of nitrous and gears, 3.73s or 4.10s.

[This message has been edited by Ripper (edited 06-12-2001).]

I was thinking about a 125 HP shot of nitrous, a cobra intake, 3.73 gears, equal length shorty hedders, a X-pipe, 2-camber flows, a pro 5.0 shifter, pulleys, cold air induction, and ported GT-40P heads or (if my buddy sells them) elelbrock 5.0 performer heads. Will this be enough. Have I left anything out that I need.

------------------
1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"
http://cwm.ragesofsanity.com/s/net2/burnout.gif

If it ain't broke, you ain't tryin hard enough

With that combo you should be able to annihilate an SS! The combo without the nitrous (if its properly set up) should be able to beat the SS, heck, I've yet to meet an SS that can keep up with me. With sticky tires a lot of people with similar combos (with a 125 shot) are running 11's.

------------------
GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B&M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

What happened to being strapped for cash!?!?! With that combo, you should put up a fight w/o the N2O and with it you will kill him! You will need things like injectors (24lb (maybe 30?)), fuel pump, and incidentals like bolts (head bolts specifically). Drop the cold air, the stock setup is fine.

this is over a long period of time. the cobra intake and heads being the farest away(which is a very long time)

Let me try again. Can I beat him with just NO2, X-Pipe, Cat-back, hedders, pullies, and gears

------------------
1990 Dodge Dynasty with 275,000 miles. Mods:chiped paint, CD player. Sucks but it was free. Praying for a stang.
The "Guetto Glider"
http://cwm.ragesofsanity.com/s/net2/burnout.gif

If it ain't broke, you ain't tryin hard enough

Add some sticky tires and some decent driving and it's a sure thing.

No problem you'll win with those parts. 225hp+125 =350hp.

Skyler

------------------
-1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows.
12.55@107mph
50-175 Nitrous Works WET Kit just added.

I think you'll definately beat him in a 1/4 mile run but he will probably beat you on the high speed. especially if you have gears.
http://www.mustangworks.com/msgboard/eek.gif

------------------
90 LX 5.0 ,bored 302, MSD 6AL, Twisted Wedge TrickFlo HDs, World class T5, BBK fender cold air induct., 70mm TB,Edelbrock performer Intake, aluminum Drve shaft, 3.55 Gears, Long Tube Headers to Flowmasters.

Just a 100 shot of n2o will do it methinks, though i don't know much about the juice.