2V intake manifold spacer

Rocket 99GT · 03-29-2002, 08:21 AM

YOU DO NOY NEED AN ALTERNATOR.

I checked the Mustang and fast frod magazine (JAN-FEB ) there is a 4 page article regarding a bullit intake installed in a 99GT.

This is what the magazine says;
" ON A NORMALLY ASPIRATED ENGINE THIS INTAKE IS VIRTUAL BOLT-ON, IF YOU HAVE A BLOWER SOME MODIFICATIONS WILL HAVE TO BE MADE FOR THIS YOU WILL NEED TO USE LONGER AFTREMARKET HOSE.

THE SECONF PROBLEM IS WITH THE ALTERNATOR BRACKET. AGAIN, WITH THE BLOWER, THE BELT DID NOT WANT TO LINE UP CORRECTLY WITH THE PULLEY, BUT THE SIMPLE FIX WAS TO JUST SHIM THE BRACKET WITH WASHERS

ON A NORMALLY ENGINE THIS WOULD NOT BE A PROBLEM, BUT THE BLOWER CAUSES THE BRACKET TO HAVE TO BE SHIMMED SLIGHTLY IN ORDER FOR THE BELT TO LINE UP PROPERLY.

"SD Wheeler"
if you don't believe what I am writting send me $1300 and I will send you the magazine

I don't work for a ford dealer I am just a simple computer analyst, I do think that $1300 is a "rip of" but hey if someone wants to pay that much by all means go ahead. This is a forum where we tried helping each, the fact is that ford is salliing the kit for $328 and according to the magazine you do not need an alternator.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cleaning the intake manifold on 5.0	Fox Body	Appearance & Detailing	7	01-10-2004 08:42 PM
identifyng intake manifold	KiltedBanshees93GT	Classic Mustangs	3	07-16-2003 01:48 PM
what do I torque the upper intake down to with a 1" spacer?	stanger8172	Windsor Power	3	02-22-2002 12:52 PM
2 aftermarket intake manifold questions	84LX89GT	Windsor Power	11	02-21-2002 07:36 PM
Power Gains w/ new intake manifold???	Blaster	Windsor Power	2	10-14-2001 01:59 AM

03-29-2002, 08:21 AM	#21
Rocket 99GT Registered Member Join Date: Jan 2001 Location: gaithersburg md, 20879 usa Posts: 120	YOU DO NOY NEED AN ALTERNATOR. I checked the Mustang and fast frod magazine (JAN-FEB ) there is a 4 page article regarding a bullit intake installed in a 99GT. This is what the magazine says; " ON A NORMALLY ASPIRATED ENGINE THIS INTAKE IS VIRTUAL BOLT-ON, IF YOU HAVE A BLOWER SOME MODIFICATIONS WILL HAVE TO BE MADE FOR THIS YOU WILL NEED TO USE LONGER AFTREMARKET HOSE. THE SECONF PROBLEM IS WITH THE ALTERNATOR BRACKET. AGAIN, WITH THE BLOWER, THE BELT DID NOT WANT TO LINE UP CORRECTLY WITH THE PULLEY, BUT THE SIMPLE FIX WAS TO JUST SHIM THE BRACKET WITH WASHERS ON A NORMALLY ENGINE THIS WOULD NOT BE A PROBLEM, BUT THE BLOWER CAUSES THE BRACKET TO HAVE TO BE SHIMMED SLIGHTLY IN ORDER FOR THE BELT TO LINE UP PROPERLY. "SD Wheeler" if you don't believe what I am writting send me $1300 and I will send you the magazine I don't work for a ford dealer I am just a simple computer analyst, I do think that $1300 is a "rip of" but hey if someone wants to pay that much by all means go ahead. This is a forum where we tried helping each, the fact is that ford is salliing the kit for $328 and according to the magazine you do not need an alternator.