NOVI 1000 big enough???

[USMC302]

IMO you'll need more than 7lbs of boost for 90hp.

[Dark_5.0]

Originally Posted by USMC302

IMO you'll need more than 7lbs of boost for 90hp.

I dont know this is a very free flowing set-up. I should start small and work my way up up with the boost if it takes 10 or 12 #'s so be it but I dont think it will.

490 RWHP is about 570 flywheel and the Novi 1000 is rated at 650HP flywheel. So I guess what I really need help with is should I start out with a Novi 2000 or S-trim instead. I hate doing things twice.

Thanks,

[USMC302]

Well, I like the fact that the Novi's are self contained but once you get into 12+lbs your gonna have bigger headaches to worry about like belt slip, which means a possible need for cog pullies, which means better blowoff valve, more fuel requirements, stronger brackets, etc...Is your tranny and rearend ready for 500RWHP?

[Dark_5.0]

Originally Posted by USMC302

Well, I like the fact that the Novi's are self contained but once you get into 12+lbs your gonna have bigger headaches to worry about like belt slip, which means a possible need for cog pullies, which means better blowoff valve, more fuel requirements, stronger brackets, etc...Is your tranny and rearend ready for 500RWHP?

My rear end is good to go but the tranny is stock. I have have been considering rebuilding it myself with some high end parts.

I am already so deep into this project I am considering just going with a Turbo set-up.

I am still waying my options but either way next season will be a blast.

Thanks for your opinion,

[USMC302]

Well, I just got a free S-trim, off a 95. I'm sending it back to Vortech this month for a rebuild and stronger bearings, I'm going for 20lbs on my little 331 and hoping for the best. Might even spray a 50 shot to keep it cool. Ordered an AFM power pipe and vortech discharge tube with the maxflow race bypass valve. Need brackets and belt and will be evaluating my fuel requirements...Gonna need that damn cage welded in now.

[Dark_5.0]

Originally Posted by USMC302

Well, I just got a free S-trim, off a 95. I'm sending it back to Vortech this month for a rebuild and stronger bearings, I'm going for 20lbs on my little 331 and hoping for the best. Might even spray a 50 shot to keep it cool. Ordered an AFM power pipe and vortech discharge tube with the maxflow race bypass valve. Need brackets and belt and will be evaluating my fuel requirements...Gonna need that damn cage welded in now.

Sounds like fun............The stock T5 is gonna be toast.

[USMC302]

I'm hoping...LOL, I can't beleive it's lasted this long. I've run a 150 shot for a few passes running 10.90's on it, launching at 6k everytime, I even launch at 6k on all motor and she's still holding, it's gotta be one of those rare freak things...I've been waiting to upgrade...