![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
![]() |
#1 |
Registered Member
Join Date: Aug 2001
Location: Albuq, NM
Posts: 21
|
![]() I have a 83 mustang 5.0 now and just put a new motor from ford in its a new 302 with 340 hp. My car is carb'd now but is it worth going to efi?? I do have the stuff for the conversion but im having second thoughts, ie a stock manifold upper and lower 19 lb injectors stock throttle and mass air and the new fuel tank? Will the stock EFI stuff perform better than a weiand stealth manifold and a 650 carb?? Just pickin you heads ???
|
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Oct 1998
Location: Ruthven, On. Canada
Posts: 32
|
![]() I'd leave it carb. Is the Weiand Intake a single or dual plane?
|
![]() |
![]() |
![]() |
#3 |
Conservative Individualist
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
|
![]() Stay with the carb set-up.
Way cheaper and easier than a conversion to EFI. |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Aug 2001
Location: Albuq, NM
Posts: 21
|
![]() I havnt bought it yet -- any sugestions to match it with an e cam and ford x heads??
by the way what do you think mileage wise the difference would be>? mpg?? whats efi wat would carb be around? |
![]() |
![]() |
![]() |
#5 |
Sober voice of Reason
Join Date: Nov 1998
Location: Kelowna, B.C., Canada
Posts: 1,514
|
![]() Stay with the carb, you'd need a gt40 or equivalent intake, 65mm TB, 75mm mass air, all the sensors, not to mention you'd have to set up a fuel system, computer and a professional tuner to get the same performance as the carb setup you describe. If a carb is tuned properly then you can get decent mileage, I usually get about 15-17mpg city and 22-25mpg highway.
The swap would be worth it if you were going to go with a blower or a turbo but N/A there would be not much point. ------------------ GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B&M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty! |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]() a 302 w/ 340 hp????? how much???????
------------------ Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump... Some day (3:73 gears & N2O)!!! will this ever end???? |
![]() |
![]() |
#7 |
Registered Member
Join Date: Aug 2001
Location: Albuq, NM
Posts: 21
|
![]() It was 3100 at a local ford motorsport distributor. I just cant decide to go carb or efi , my car is wired for card but I also have all the stuff to make it a EFI. HELLPPPP
|
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() carb'd is alot less of a headache, a bit easier to keep tuned, and less things to go wrong or break.....
just my opinion.... ------------------ Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump... Some day (3:73 gears & N2O)!!! will this ever end???? |
![]() |
![]() |
#9 |
Registered Member
Join Date: Oct 1998
Posts: 334
|
![]() Howdy. I just did an EFI swap on my 84 (had same setup as your 83) which was somewhat of a headache grafting the EFI harness into the 84's. Lots of relocating to do such as battery, solenoid, radiator overflow, and some of the electrical system. The fuel lines bolted in on the existing fuel line mounting points. You will also have to find a different sender for the fuel gauge (83-86 style with electric fuel pump) or modify your existing one. I was going to do a write up of the swap but haven't gotten around to it yet. Feels like a totally different car. It was a fun project to do as well.
------------------ Factory Five Roadster Build Yellow T-roofed 84GT (In users rides)& 20th Anniversary GT350 ragtop [This message has been edited by fiveliter8 (edited 08-07-2001).] |
![]() |
![]() |
![]() |
#10 |
Registered Member
Join Date: Jan 2001
Location: ny
Posts: 197
|
![]() without a doubt carb. you will get the power with a carb real easy. and cheaper. your gas mileage will be the same if its tuned right. i got 17mpg on my car on the street. for that setup you will benifit best from a performer rpm intake and a 650 dp holley. a 600 vac sec. like everyone will surely sugest is not a good carb for that motor. invest in a good dist. like the msd. it will offer better tuning and is easier to use with the msd box.
if you do decide to go carb which will be the best choice for you, you can sell the injection conversion. i am looking for a mass air conversion so if you do sell it let me know and maybe i can make a good deal with you. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
1966 Ford Mustang Frame Measurements | bigmac5300 | Classic Mustangs | 6 | 10-25-2009 01:15 PM |
19th Annual Mustang & Ford Show - Richmond, Va. | 95SVTCobraVA | Ford Show & Go | 2 | 09-07-2003 09:46 PM |
5.0 Mustang and Super Ford. Babe of the Month! | jz_mustang50 | Windsor Power | 8 | 10-18-2001 04:34 PM |
1982 Mustang GT TURBO 4 carb | PLAY400 | Small Ponies | 0 | 08-13-2001 12:59 PM |
1971 ford mustang mar 1 | v865 | Classic Mustangs | 1 | 06-24-1999 01:56 AM |