© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
07-03-2001, 05:44 PM | #1 |
Registered Member
Join Date: May 2001
Location: Athens,Ga.
Posts: 26
|
aod problems
Just put in transgo shift kit, runs great but totally missing second. I think there may be too much fluid or would that do it?
|
07-03-2001, 08:06 PM | #2 |
Registered Member
Join Date: Jun 2001
Location: new castle pa
Posts: 32
|
tear it back out and look it over esp. 1-2 valve. check tv. cable first though. you probly put somthing in wrong also wouldnt be bad idea to put in a servo while your up there heres a good article on the transgo kit. http://www.fordmuscle.com/archives/2...it/index.shtml heres a good site on trannys http://www.transonline.com/
|
07-04-2001, 12:38 AM | #3 |
Registered Member
Join Date: Oct 1999
Location: Gordonville MO USA
Posts: 448
|
A good upgrade for the 2-3 accumulator
is Art Carr's "zero leak" 2-3 accumulator. About $35 or so. Also good time to add A od servo. |
07-04-2001, 01:18 AM | #4 |
Registered Member
Join Date: Feb 2001
Location: Lafayette,IN USA
Posts: 18
|
I agree with macx, Art Carr's 2-3 accumulator. I installed the Art Carr shift kit(with 2-3 acc.) in my AOD. The accumulator is 10 times better then stock. The tv cable should be re-adjusted. I had to play around with mine a bit to get it right but it won't cause it to miss 2nd. Too much fluid will make the fluid foam up and eventually burn up the tranny. I would pull the valve body back out and make sure everything was right.
------------------ 88 LX Notch - 302(86 crown Vic- changed to HO), stock cam, ported stock heads, 76mm C&L mass air, 70mm Mac tb and EGR, Victor 5.0 intake(it's killing low end torque ), Walbro 190lph intank fuel pump, 24lb injectors, FT long tube headers, offroad H-pipe, Flowmasters, Compucar NOS kit 125 shot pill, Aod - Art Car shift kit, FMS 430 gears, 28x10.5 M/T Sportman Pro rears(soon on 9" Weld Draglites), Kumho fronts on 4" Weld Draglites. http://www.indianastangers.com ICQ# 37309223 |
07-04-2001, 08:24 AM | #5 |
Registered Member
Join Date: May 2001
Location: Athens,Ga.
Posts: 26
|
Thanks, it is coming off again today.
|
Thread Tools | |
Display Modes | Rate This Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
what if any problems with your Modular Model Gt/Cobra? | fixer | Modular Madness | 18 | 04-03-2005 09:18 AM |
HELP: Problems after Paxton Novi 1000 install | Meatman | Windsor Power | 3 | 10-17-2002 06:03 PM |
Sick 88 Gt Computer problems? | ziggy_2k | Windsor Power | 5 | 06-02-2002 10:33 PM |
'65 - Pull Away Problems - Action Plan | geordie | Classic Mustangs | 0 | 05-14-2002 01:43 PM |
Cooling System problems | 1973Mach1 | Classic Mustangs | 7 | 06-25-1999 10:33 PM |