cobra intake

scale · 04-07-2003, 10:23 PM

can i use my stock throttle body, tps and all that jazz? I am not sure what the stock opening is on a 93 cobra intake. I have heard it is 65mm but am not sure (not sure what a standard tb size is...60mm?). If that is the case and i get a 65mm tb will i have to get a different tps? massair meter ...or anything else?

Also does anyone know where to pick up a set of upper to lower bolts for the intakes. I dont have them. I am assuming the lower intake bolts are the same as any old intake...cobra or not. Ill just use my old ones from my LX lower instake.

Thanks

Technick · 04-07-2003, 11:36 PM

Yes the stock throttle body will work. 55mm is the stock size. Cobra had a 65mm t-body. The same T.P. sensor works. Do not have to use a different MAF if same injectors. The lower intake bolts will work. You will need a few different upper intake bolts. A good hardware store or other specialty bolt and supply house will be able to get you the right lenght upper bolts.

04-07-2003, 10:23 PM	#1
scale Registered Member Join Date: Mar 2000 Location: minneapolis, mn Posts: 158	cobra intake can i use my stock throttle body, tps and all that jazz? I am not sure what the stock opening is on a 93 cobra intake. I have heard it is 65mm but am not sure (not sure what a standard tb size is...60mm?). If that is the case and i get a 65mm tb will i have to get a different tps? massair meter ...or anything else? Also does anyone know where to pick up a set of upper to lower bolts for the intakes. I dont have them. I am assuming the lower intake bolts are the same as any old intake...cobra or not. Ill just use my old ones from my LX lower instake. Thanks __________________ 1991 LX coupe,AOD, red, 80k, K&N, MAC cat back, MAC off-road X, Autometer Gauges, BBK Ceramic unequals, fully polished upper intake, fuel rails, and egr, working on installing.....MM full length subs, H&R sport springs, MM Lower control arms, MM caster camber plates, bilstein shocks, struts.

04-07-2003, 11:36 PM	#2
Technick Registered Member Join Date: Feb 2003 Location: Seattle, Wa. Posts: 175	Yes the stock throttle body will work. 55mm is the stock size. Cobra had a 65mm t-body. The same T.P. sensor works. Do not have to use a different MAF if same injectors. The lower intake bolts will work. You will need a few different upper intake bolts. A good hardware store or other specialty bolt and supply house will be able to get you the right lenght upper bolts. __________________ No matter how much you spend, or how much you prepare, there is ALWAYS someone else faster or quicker than YOU!!!!!!!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cobra Intake Problems	Wraith	Windsor Power	2	05-20-2003 02:55 PM
cobra tb to intake studs	scale	Windsor Power	1	04-18-2003 11:03 AM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
Cobra Intake?	95mustanggt	Windsor Power	5	10-01-2002 09:55 AM
sn95 Cobra intake vs older sn93 Cobra intake	Fordman50	Windsor Power	2	03-17-2001 01:09 AM