is this a hot engine combo? take a look!

5ohlover · 06-08-2003, 11:57 PM

whatcha think of this complete combo:

Edelbrock 6037 pedastal mount heads
Anderson N-41 cam
Crane 1.6 rr's
Edelbrock RPM intake
BBK 70mm TB and EGR
Pro-M 75mm
FRPP 30# inj.
Mac cold air intake

then ima get new lifters, possibly high flow water pump, new double roller timing chain. and what else?

tell me what u think?

thanks for your time and help,

Luke

SaleenGTS · 06-09-2003, 08:10 AM

Should run VERY strong...that N-41 is a good cam. You will love the BBK 70mm...especially the tubine-like whistle....sounds like you are gonna blast off.

I would say that wit the right tuning, you could make 285-295 rwhp.

I had a similar setup on my "pre-blown" motor that had TFS TW's, TFS #2 cam, TFS Track Heat, 70mm, 77mmMAF, and rockers, exhaust...303 rwhp. The only difference basically was the heads...the TW's are a litle better flowing.

Dark Knight · 06-09-2003, 09:00 AM

one thing... if you dont have the rockers or the heads... go with stud mount instead..

06-08-2003, 11:57 PM	#1
5ohlover Registered Member Join Date: May 2003 Location: Glencoe, IL Posts: 3	is this a hot engine combo? take a look! whatcha think of this complete combo: Edelbrock 6037 pedastal mount heads Anderson N-41 cam Crane 1.6 rr's Edelbrock RPM intake BBK 70mm TB and EGR Pro-M 75mm FRPP 30# inj. Mac cold air intake then ima get new lifters, possibly high flow water pump, new double roller timing chain. and what else? tell me what u think? thanks for your time and help, Luke __________________ 91GT mods: gears and exhaust

06-09-2003, 09:00 AM	#3
Dark Knight Registered Member Join Date: Oct 1998 Location: Az Posts: 854	one thing... if you dont have the rockers or the heads... go with stud mount instead.. __________________ 84 convt,roller 302,AFR's, performer 3.55's, underdrives BBK shorties stock cam, 1.7's 13.58@102.84 and a '68 stang .. project 8 sec street car... 557 big block + N20 :-) http://members.cox.net/darkknight302/68nwrear.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need to sell Engine and tranny	OnMy3rdStang	Blue Oval Lounge	5	03-09-2003 10:29 PM
was there ever such thing as an early hartop mustang with a cobra engine?	domingo	Classic Mustangs	5	04-06-2002 07:56 PM
Rebuilding an engine.. and then some	Halz	Windsor Power	5	04-01-2002 02:01 AM
new engine combo	Green9550	Windsor Power	0	03-18-2002 09:18 AM
New engine combo	RobertD	Windsor Power	4	05-19-2001 10:28 PM

06-09-2003, 08:10 AM	#2
SaleenGTS RICE taste like Chicken Join Date: Jun 2000 Location: Edmond, OK Posts: 687	Should run VERY strong...that N-41 is a good cam. You will love the BBK 70mm...especially the tubine-like whistle....sounds like you are gonna blast off. I would say that wit the right tuning, you could make 285-295 rwhp. I had a similar setup on my "pre-blown" motor that had TFS TW's, TFS #2 cam, TFS Track Heat, 70mm, 77mmMAF, and rockers, exhaust...303 rwhp. The only difference basically was the heads...the TW's are a litle better flowing. __________________ Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp