GT40 irons?
 

As I posted before, I just picked up a pair of gt40 iron heads from one of my buddies. They have been ported to fit a 1250 intake gasket. Are any of you guys running these heads, or know anyone who does. Im just trying to get some ideas of some combos I could put together with these heads. If you guys could run some numbers or times by me I would reallt appreciate it. Thanks - John

I have a set also, one of them is busted. The were used with a 1087 wolverine, a gt-40 , 24lbs. Ran 12.0s You want them?

Define "busted".

Busted...
Cam installed wrong
piston hitting valve
keepers fall off of valve
valve falls into motor at 2000 rpms
motor stops dry
loosen head bolts, head rises off motor
B U S T E D H E A D
:) I can E- mail you a pic.

Does the motor still run? What else is on sale?

That was two motors ago :)

Im not familiar with that wolverine cam, can you give me some info on it? How well would it work with an AOD? Thanks man -John

A friend has one with 2.02/1.60 Edelbrocs, victor jr, 302 long rod, C-4 4.10s 11.20s all day. AOD I don't know.

13.34@104.77 race weight 3310lbs. on M/T sportsman Pros.
See my sig for mods, chances are the car will pick up a couple of mph with a better carburetor.