MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   EFI Harness (http://forums.mustangworks.com/showthread.php?t=29431)

z3beemer 09-28-2002 10:48 PM

EFI Harness
 
Does any know if / where you can buy just the plug edns for the fuel injector harness? Many of the clips that hold the plugs to the injectors are broken and I don't want to pay $400 for a new harness. Thanks in advance

Paul

mgt351 09-29-2002 08:38 PM

I know that when I worked at carquest they had the plug ends with pigtails listed in there EC brand, might want to try there, It will have to be looked up in the catalog.

z3beemer 09-29-2002 10:28 PM

Thanks!
 
Thanks for the replay. I stopped at Auto Zone today and they have what I need. $3.00 each. I think I just order 8 of them and replace them all. I noticed the pigtails are both white so I'm assuming there's no polarity to be observed when connecting them. Do you (or anyone else) know for sure?

Thanks again.

Paul

bigred90gt 09-30-2002 01:49 PM

I am unsure of the polatiry issue, but I do know this. The wires have to be soldered. A friend of mine put a new motor in his CRX and used butt connectors, and the thing ran like garbage. He took it to a speed shop, they cut out the butt connectors and soldered the wires, and now it runs fine. Butt connectors have too much resistance.
Caymon


All times are GMT -5. The time now is 01:29 PM.