EFI Harness

z3beemer · 09-28-2002, 10:48 PM

Does any know if / where you can buy just the plug edns for the fuel injector harness? Many of the clips that hold the plugs to the injectors are broken and I don't want to pay $400 for a new harness. Thanks in advance

Paul

mgt351 · 09-29-2002, 08:38 PM

I know that when I worked at carquest they had the plug ends with pigtails listed in there EC brand, might want to try there, It will have to be looked up in the catalog.

z3beemer · 09-29-2002, 10:28 PM

Thanks for the replay. I stopped at Auto Zone today and they have what I need. $3.00 each. I think I just order 8 of them and replace them all. I noticed the pigtails are both white so I'm assuming there's no polarity to be observed when connecting them. Do you (or anyone else) know for sure?

Thanks again.

Paul

bigred90gt · 09-30-2002, 01:49 PM

I am unsure of the polatiry issue, but I do know this. The wires have to be soldered. A friend of mine put a new motor in his CRX and used butt connectors, and the thing ran like garbage. He took it to a speed shop, they cut out the butt connectors and soldered the wires, and now it runs fine. Butt connectors have too much resistance.
Caymon

09-28-2002, 10:48 PM	#1
z3beemer Registered Member Join Date: Apr 2001 Location: Valparaiso, IN USA Posts: 56	EFI Harness Does any know if / where you can buy just the plug edns for the fuel injector harness? Many of the clips that hold the plugs to the injectors are broken and I don't want to pay $400 for a new harness. Thanks in advance Paul

09-29-2002, 08:38 PM	#2
mgt351 Registered Member Join Date: Sep 2002 Location: Atoka, Tn Posts: 1	I know that when I worked at carquest they had the plug ends with pigtails listed in there EC brand, might want to try there, It will have to be looked up in the catalog. __________________ 87 Mustang GT 70 Torino GT 429 C6 70 Ford F100 soon 2 B 429/C6

09-29-2002, 10:28 PM	#3
z3beemer Registered Member Join Date: Apr 2001 Location: Valparaiso, IN USA Posts: 56	Thanks! Thanks for the replay. I stopped at Auto Zone today and they have what I need. $3.00 each. I think I just order 8 of them and replace them all. I noticed the pigtails are both white so I'm assuming there's no polarity to be observed when connecting them. Do you (or anyone else) know for sure? Thanks again. Paul

09-30-2002, 01:49 PM	#4
bigred90gt 2 Stangs in the Stable Join Date: Apr 2002 Location: Baytown, TX Posts: 1,209	I am unsure of the polatiry issue, but I do know this. The wires have to be soldered. A friend of mine put a new motor in his CRX and used butt connectors, and the thing ran like garbage. He took it to a speed shop, they cut out the butt connectors and soldered the wires, and now it runs fine. Butt connectors have too much resistance. Caymon __________________ '90 GT Under construction Best E.T. = Fast @ High Speeds - OK So I Lie. So What!!! 04 F-150 STX 4.2L 5 spd Rice Haters Club Member #128

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine wiring harness	Dog5ohfun	Windsor Power	2	04-25-2004 11:35 PM
New Main Harness M-12071-c302	Mountain Main	Windsor Power	10	06-18-2003 04:57 AM
88 harness to 90 efi 5.0 harness	UCMEFLY2	Windsor Power	0	09-10-2002 07:06 PM
Which wiring harness and computer do I have to have?	EazyE-CPT	Windsor Power	0	07-21-2002 11:33 PM
whats up with this wiring harness?	LX XLR8R	Windsor Power	3	08-17-2001 10:53 AM