Side exhaust for a fox body.
 

I did not know that there was a kit to do this, so I thought I would share. Would this look okay on my 89
http://www.cervinis.com/NewFiles/partssearch_pg.html

------------------
Steve Stumbaugh

89 LX 5.0 5sp.
Removed air silencer
Motorcraft 8mm wires
Autolite platinum plugs
BBK O/R h-pipe

That would probably look as good as side exhaust on a '79 T/A.

eeeeewwwwwwwww!

------------------
1988 Mustang GT
11.8 @ 123 (7/14/01)
1992 BadAzz Wrangler
1993 Explorer

Different......

------------------
1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, etc... etc...

1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!

http://www.geocities.com/i8urvpr/JM.html

I've seen that STYLE on a Corvette before and thought it looked horrendous. It didn't looked like it matched up well.

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Edelbrock 65mm TB & EGR, 3.73 Gears, Super Competition Hooker Headers, 2 1/2 in. High Flow H-Pipe & 2 1/2 in. Flowmaster Cat Back, Pro 5.0 Shifter, 16* Timing Advance, 8.5mm MSD Super Cunductor Plug Wires, Romoved front Sway Bar, Nitto DragRadial, Pro-Shift Lite, LX lights

Uh, it's okay, I guess. ...not my style. You'd have to worry about burning your leg every time you got out the car.

-----------------------------------------
351W-powered 1979 Ford Mustang notchback
Stock 5.8L under 4" cowl, C4 w/ shift kit
Holley 750 cfm, Edelbrock Performer RPM intake
1 5/8" MAC shorty headers, Al driveshaft
2.5" Off road H-pipe, 2-chamber Flowmasters
Front: 225/60/15, Rear: 255/60/15 Eagle GT II
Weld wheels (15x6;15x8), 8.8" Rear w/ 3.55s
14 x 4” K&N air filter (getting the Xtreme setup someday) http://www.mustangworks.com/msgboard/cool.gif

"Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body

I think that style looks good on the old muscle vettes and the shelby cobras...maybe even on the original Viper RT/10...however it just looks yuk on that lx

It doesn't look much different than the Borla/SVO side exhaust for 94-95. I think it would be acceptable. However, for less than 700 bucks Bassini has stainless side exhaust kits (no skirts/fibreglass) that look great and are ceramic coated.

The exhaust gas is never hot enough to burn you at door but the pipes can hurt. They sit far enough back that you would never brush them during daily use.

There is something to be said for rolling down the window and having your own exhaust roaring in your ears!

Mike

------------------
Live near St.Louis?
Check out Mustang Muscle and Dyno in High Ridge, MO
Check out my ride.