battery move!! - Page 2

vortechsaleen492 · 03-03-2004, 06:39 PM

you got it, youll have a 10ga ground for the computer and a larger 4ga ground too.

Scott

whitepony · 03-03-2004, 08:53 PM

i also forgot to ask scott i dont have to run the ECU ground to the back to have it ground on the bat.? i just have to run it the sway bar ground?

thanks alot scott (you have ben a big help)

-mike

vortechsaleen492 · 03-03-2004, 11:35 PM

Quote:

Originally posted by whitepony
i also forgot to ask scott i dont have to run the ECU ground to the back to have it ground on the bat.? i just have to run it the sway bar ground?

thanks alot scott (you have ben a big help)

-mike

I was on Pro-m's site while i was doing my battery relocation, they recommend you run a 10ga from the battery NEG- to computer ground. i didnt take this step and havnt noticed a need for it.

Scott

whitepony · 03-07-2004, 12:28 AM

hey scott
for the ECU ground what did u do just cut it and leave it or did you ground it to the fender? again

i am done my relocate and i am happy with it just have to make up my mind weather to run the ECU ground to the back or not

thanks for all the help scott

-mike

vortechsaleen492 · 03-07-2004, 07:33 AM

the ECU was originally grounded to the battery NEG- and attached to the inner fender, your gonna run it now to the sway bar mount. if your car acts funny at all youll need to run a 10ga ground for the ECU back to the battery NEG-

Good Luck, Scott

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Battery..Solenoid..Starter problem	abesmith69	Windsor Power	6	04-09-2003 09:39 AM
Battery Disconnect and ECM Reset	mimicons	Windsor Power	1	02-18-2003 11:20 AM
Battery is dead after pulley install?!?	Stang_Crazy	Windsor Power	16	02-07-2002 09:39 PM
Battery not charging	Mustang_289	Windsor Power	8	01-04-2002 07:07 AM
battery removal	82 GT	Windsor Power	2	03-18-2001 04:40 PM

03-03-2004, 06:39 PM	#21
vortechsaleen492 Registered Member Join Date: Feb 2004 Location: Oxford, Pa Posts: 10	you got it, youll have a 10ga ground for the computer and a larger 4ga ground too. Scott

03-03-2004, 08:53 PM	#22
whitepony Registered Member Join Date: Feb 2003 Location: ontario canada Posts: 165	i also forgot to ask scott i dont have to run the ECU ground to the back to have it ground on the bat.? i just have to run it the sway bar ground? thanks alot scott (you have ben a big help) -mike

03-07-2004, 12:28 AM	#24
whitepony Registered Member Join Date: Feb 2003 Location: ontario canada Posts: 165	hey scott for the ECU ground what did u do just cut it and leave it or did you ground it to the fender? again i am done my relocate and i am happy with it just have to make up my mind weather to run the ECU ground to the back or not thanks for all the help scott -mike

03-07-2004, 07:33 AM	#25
vortechsaleen492 Registered Member Join Date: Feb 2004 Location: Oxford, Pa Posts: 10	the ECU was originally grounded to the battery NEG- and attached to the inner fender, your gonna run it now to the sway bar mount. if your car acts funny at all youll need to run a 10ga ground for the ECU back to the battery NEG- Good Luck, Scott