Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-14-2004, 05:52 PM
|
#2 |
|
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
Re: valve rotators
I wish i could help, but i used the same (stock) retainers on mine, and used comp cams springs. (dont remember part #)
Only thing is, it could have thrown off my installed height, but everything works good, my car pulls to 6k in a hurry. but i think you might need a machine shop to do it, (unless you have the tools) so they can measure, and shim if necessary. good luck, and trust me anything works better than those stock springs.
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| drain valve on radiator---how to undo it? | cazint | Modular Madness | 1 | 06-11-2004 08:54 PM |
| valve problem | pearlgt40 306 | Windsor Power | 3 | 07-05-2003 01:21 AM |
| Will my stock or aftermarket h-pipe bolt up to a 4 valve? | Redstang96 | Modular Madness | 0 | 08-29-2002 09:56 PM |
| Proportioning Valve | MidniteWrider | Classic Mustangs | 1 | 07-11-2001 09:14 AM |
| PCV Valve what the ?@#$@#$@$ | Chevyguy | Windsor Power | 3 | 04-11-2001 08:01 PM |