© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
08-09-2003, 10:59 AM | #1 |
RICE taste like Chicken
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
|
Accessory belt won't fit...WHY???
OK, here is the deal. I have a suprecharger and have relocated my alternator under my smog pump.
Recently my smog pump locked up and I threw a belt, so I removed that and my alternator. I since reinstalled them both. Before this, I was running a 91.5" belt, no problem. Since then I have tried a 91.5", 91", and 90.5" None of them work, they all either were too long and ended up rubbing on the Water Pump pulley, or too tight and broke. Why? Nothing has changed....EXCEPT Since I reinstalled my alternator, one of the studs is stripped out. So it isn't in there. It happens to be the one that anchors it into the block. So now there is just one bolt in the bracket and the one that locks the alternator up to the Smog pump... Could that be the culprit? Any advice is much appreciated...thanks guys!
__________________
Dustin 89 Saleen GT Sport Supercharged 306 Started her up 6/8/03 Old Motor Supercharged 347 516 rwhp 553 rwtq 11.249@126.83 1997 Honda CBR 1100XX Super Blackbird 162 hp |
08-09-2003, 12:24 PM | #2 |
Registered Member
Join Date: Oct 2000
Location: Ontario canada
Posts: 446
|
might sound silly but are you routing it the same way
if so take some rope and measure it . good luck
__________________
89 with 331 t3'/t4 hybrids. upr Suspention worked out finnaly . 9.89 144 mph . |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Will an 84.5" belt harm accessory items? | twilightcall | Windsor Power | 3 | 06-13-2003 01:09 PM |
351W belt routing | Ieatcamaros | Windsor Power | 1 | 05-02-2003 08:15 PM |
short belt | 89droptop | Windsor Power | 2 | 11-20-2002 04:20 PM |
What length belt with UD pullies | LowDown | Windsor Power | 2 | 12-17-2001 08:21 AM |
serp. belt | streetfreak | Windsor Power | 2 | 10-02-2001 10:00 AM |