cobra intake numbers....and a few questions...

scale · 04-02-2003, 08:55 PM

I have a cobra intake and am wondering what year it is off of.

Here are the #s on the upper and lower:

heres the numbers i found at the front of the cobra intake

RF-F87E-9K461BA

THERES ANOTHER NUMBER THAT SAYS 3636 NEXT TO IT.

THE UPPER MANIFOLD READS AS FOLLOWS

RF-F3ZE-9425-A16A

WITH THIS NUMBER UNDER THAT NUMBER BUT MUCH SMALLER CASTING

041621

Any ideas what year this thing is?

Also i am going to stick this on my stock 91 lx coupe. Any idea what the upper and lower gasket kit numbers are? Also does anyone have any recommendations or suggestions on installation of a cobra upper and lower on stock heads?

Thanks in advance.

Mario95 · 04-03-2003, 01:31 AM

Does your intake look like this?

The above is the '93 and earlier style intake.

Or does it look like this?

This one is for the SN95's

scale · 04-03-2003, 01:42 AM

looks like the 93 and ealier one you have posted.

NotchJohnson · 04-03-2003, 12:04 PM

More than likely it didnt come off an actual cobra, but there is a slight possibility. I dont remember the # on the gaskets it uses, I have a 1250 on mine for the intake, and for the upper/lower gasket the gt-40 style will work. You shouldnt run into any problems on the install either.

scale · 04-03-2003, 07:24 PM

what else would it have come off of if not a cobra? Were there other cars with this intake? It says cobra 50 on plate on the top.

im confused

NotchJohnson · 04-03-2003, 11:06 PM

only the cobra has that as stock equipment. the 93-95 lightnings had similar intakes which were the gt40's.

04-02-2003, 08:55 PM	#1
scale Registered Member Join Date: Mar 2000 Location: minneapolis, mn Posts: 158	cobra intake numbers....and a few questions... I have a cobra intake and am wondering what year it is off of. Here are the #s on the upper and lower: heres the numbers i found at the front of the cobra intake RF-F87E-9K461BA THERES ANOTHER NUMBER THAT SAYS 3636 NEXT TO IT. THE UPPER MANIFOLD READS AS FOLLOWS RF-F3ZE-9425-A16A WITH THIS NUMBER UNDER THAT NUMBER BUT MUCH SMALLER CASTING 041621 Any ideas what year this thing is? Also i am going to stick this on my stock 91 lx coupe. Any idea what the upper and lower gasket kit numbers are? Also does anyone have any recommendations or suggestions on installation of a cobra upper and lower on stock heads? Thanks in advance. __________________ 1991 LX coupe,AOD, red, 80k, K&N, MAC cat back, MAC off-road X, Autometer Gauges, BBK Ceramic unequals, fully polished upper intake, fuel rails, and egr, working on installing.....MM full length subs, H&R sport springs, MM Lower control arms, MM caster camber plates, bilstein shocks, struts.

04-03-2003, 01:31 AM	#2
Mario95 Registered Member Join Date: Apr 2003 Location: San Jose,CA, USA Posts: 3	Does your intake look like this? The above is the '93 and earlier style intake. Or does it look like this? This one is for the SN95's __________________ Mario Sousa Owner www.strictly-motorsports.com In my stable '85 Mustang GT For Sale just ask '92 Mustang Hybrid '95 Mustang Cobra #???? DOB 02/07/1995

04-03-2003, 01:42 AM	#3
scale Registered Member Join Date: Mar 2000 Location: minneapolis, mn Posts: 158	looks like the 93 and ealier one you have posted. __________________ 1991 LX coupe,AOD, red, 80k, K&N, MAC cat back, MAC off-road X, Autometer Gauges, BBK Ceramic unequals, fully polished upper intake, fuel rails, and egr, working on installing.....MM full length subs, H&R sport springs, MM Lower control arms, MM caster camber plates, bilstein shocks, struts.

04-03-2003, 12:04 PM	#4
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	More than likely it didnt come off an actual cobra, but there is a slight possibility. I dont remember the # on the gaskets it uses, I have a 1250 on mine for the intake, and for the upper/lower gasket the gt-40 style will work. You shouldnt run into any problems on the install either. __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.

04-03-2003, 07:24 PM	#5
scale Registered Member Join Date: Mar 2000 Location: minneapolis, mn Posts: 158	what else would it have come off of if not a cobra? Were there other cars with this intake? It says cobra 50 on plate on the top. im confused __________________ 1991 LX coupe,AOD, red, 80k, K&N, MAC cat back, MAC off-road X, Autometer Gauges, BBK Ceramic unequals, fully polished upper intake, fuel rails, and egr, working on installing.....MM full length subs, H&R sport springs, MM Lower control arms, MM caster camber plates, bilstein shocks, struts.

04-03-2003, 11:06 PM	#6
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	only the cobra has that as stock equipment. the 93-95 lightnings had similar intakes which were the gt40's. __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake flow numbers	VeNuM	Windsor Power	0	12-06-2002 09:10 PM
flow numbers on edelbrock rpm intake?	Mach 1	Windsor Power	10	02-07-2002 09:20 AM
Intake Flow Numbers? anyone have them	NewAge 5.0	Windsor Power	0	09-25-2001 12:05 PM
Dyno numbers and a few questions	Chris_H	Windsor Power	7	06-28-2001 08:36 AM
Salaeen, Shelby, Cobra please define these for me.	Taqus	Blue Oval Lounge	3	01-17-2001 02:39 AM