SINGLE CHAMBER FLOWS

1988GTCONERTIBLE · 06-12-2001, 11:02 AM

Currently running Mac offroad pipe and Mac Powerchamber mufflers. After putting in new motor I want to put a high flow cat pipe on and run single chamber flowmasters to improve sound quality. The only problem is that I have never heard single chambers on a stang. Car sounds great now but I don't know what the flows will sound like, any guesses?

Rick 91GT · 06-12-2001, 01:42 PM

They are really loud and when you lay into the pedal all the nice tone goes away it is just loud noise. They are a lot smaller so if you do get them you will need a small section of pipe to conect them to the existing stuff. I persoanly would keep the set-up you have, but that's just my opinion. I like mine nice and loud with the MAC dumps atleast when I go to WOT it still has a nice tone instead of just wide open noise.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

Five0 · 06-12-2001, 05:48 PM

I have them on my car and they sound like crap with tail pipes but with turndowns they sound great. I have the 1 chambers w/turndowns.

I have two sound clips of them in the user rides; check them out.

Sound clip 1
Sound clip 2

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
12.565 @109.38mph 1.764 60ft

06-12-2001, 11:02 AM	#1
1988GTCONERTIBLE Registered Member Join Date: Mar 1999 Posts: 11	SINGLE CHAMBER FLOWS Currently running Mac offroad pipe and Mac Powerchamber mufflers. After putting in new motor I want to put a high flow cat pipe on and run single chamber flowmasters to improve sound quality. The only problem is that I have never heard single chambers on a stang. Car sounds great now but I don't know what the flows will sound like, any guesses?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1 chamber flows?	94snake	Windsor Power	2	02-03-2004 12:45 PM
Single Flange Headers	ChunkFunky	Windsor Power	8	06-25-2003 12:47 PM
bassani x-pipe and 2 chamber flows	jwmustangin	Modular Madness	2	06-08-2002 05:32 PM
1 chamber or 2 chamber flowmaster mufflers	pete1	Windsor Power	1	09-02-2001 07:00 PM
1 Chamber Flows	95 King GT	Windsor Power	2	06-18-2001 06:35 PM

06-12-2001, 01:42 PM	#2
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	They are really loud and when you lay into the pedal all the nice tone goes away it is just loud noise. They are a lot smaller so if you do get them you will need a small section of pipe to conect them to the existing stuff. I persoanly would keep the set-up you have, but that's just my opinion. I like mine nice and loud with the MAC dumps atleast when I go to WOT it still has a nice tone instead of just wide open noise. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

06-12-2001, 05:48 PM	#3
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	I have them on my car and they sound like crap with tail pipes but with turndowns they sound great. I have the 1 chambers w/turndowns. I have two sound clips of them in the user rides; check them out. Sound clip 1 Sound clip 2 ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX 12.565 @109.38mph 1.764 60ft