© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
01-07-2005, 04:22 PM | #1 |
fox fanatic
Join Date: Jul 2004
Location: wichita Ks.
Posts: 61
|
slicks
hello,
I have a 89 GT. I have a set of M/T 26X8.5's on stock turbine rims. I want to go to some bigger rims and slicks, probably 26X10's. what would be the size of rim I would need, size plus back spacing? What is the biggest slick you can get in there? just curious. Thanks
__________________
meknized Blue/silver 89 GT, Coast 331, ported GT-40x heads, X cam, cobra intake, 70mm TB, 75mm bullet, mac intake, 24lb inj, 255 lph fuel pump, accufab regulator, pulleys, MSD coil, 6AL, 300+ wires, Tremec 5 spd. pro 5.0 shifter, FMS drive shaft, headers, X-pipe, flowmasters, auburn pro series posi. moser 31s axles,3:73s, etc. Best ET 12.02@112.5 a pic A vid of a run:http://www.youtube.com/watch?v=l9JMcErxML8 |
01-07-2005, 04:45 PM | #2 |
Registered Member
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
|
Re: slicks
I have ran 26X10.5 mickey thompson slicks on stock turbines with no problems for over 3 years. We are talking about hundreds of 1/4 mile runs without issue.
On a side note if you cant hook with 26X8 slicks you have suspension issues. I pull 1.6 60ft's on 26X8 hoosier slicks right now. I think most people run 15X8 rims with 4.5-5.5 back spacing. As far as the biggest slick you can fit in there without doing some massaging with a hammer. The biggest I have seen is 28X11.5's and he had to roll the lip on his fender wells.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer |
01-19-2005, 10:17 AM | #3 |
It's a lot like a race car
Join Date: Aug 2000
Location: Meridian, MS
Posts: 4,130
|
Re: slicks
I fit 28x11.5 ET streets oh my notch without doing anything, but they rub the fender lips in turns, I need to roll them.
A buddy of mine rolled his fender lip and took a sledge hammer and a grind to his inner fender and he as a set of 28x13.5 ET streets on his 90 GT
__________________
1987 Buick T-type 1998 HD Electra Elide |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What size slicks? | Chris_H | Windsor Power | 4 | 08-31-2003 04:54 PM |
Slicks + Suspension = .6 off 1/4 mile....new track times | 84LX89GT | Stang Stories | 6 | 05-14-2003 08:59 AM |
what size street slicks will fit on my 10 hole wheels? | Chevysucks | Windsor Power | 2 | 09-18-2002 02:16 PM |
Slicks vs Rear end | cyberstang5.0 | Windsor Power | 3 | 11-07-2001 08:29 PM |
First time on slicks, pics in side! | Mustang92 | Blue Oval Lounge | 21 | 02-13-2001 12:46 AM |