Will these valve covers work on EFI?

Bad89stang · 05-19-2002, 12:00 AM

This guy sells these on Ebay all the time. They have a baffle under the fill hole, but I am unsure if they will cause problems. Will this let too much unmetered air into the valvetrain? Could I use a plug or special breather to make them work? Let me know if any of you guys are using something similar. Thanks.

Bad89stang · 05-19-2002, 10:46 AM

Green9550 · 05-19-2002, 12:15 PM

I don't see why they wouldn't. Take care.

-Billy

chris91LX · 05-19-2002, 12:18 PM

It would depend on the height of the vc. I had to cut the baffle out of my stock vc's to make them fit w/ the rr's, but they fit fine now. If these are at least the same height as the stockers you should be fine, if they are not they won't work.

05-19-2002, 10:46 AM	#2
Bad89stang Registered Member Join Date: Aug 2001 Location: Ft. Worth, TX Posts: 456	TTT __________________ You're gonna need your seatbelt

05-19-2002, 12:15 PM	#3
Green9550 Resident Redneck Join Date: Jan 2002 Location: Cecil County, MD Posts: 165	I don't see why they wouldn't. Take care. -Billy __________________ 95' GT: 306, XL Ross Pistons, Ultra Lite H-beam Rods, Forged Scat Crank, 28oz Romac, 28oz JW flexplate, FTI ported RPM II intake, FTI ported AFR 165's, FTI custom cam, 75mm BBK Throttle body, 80mm Pro-M, 4800 PI stall, PA Super Comp AODE, Strange 33 spline race axles, Strange ultra lite spool, Motive lite 4.30's, Strange rear race brakes, Mega bite seniors, double adjustable uppers w/spherical bushings, Racecraft anti-roll bar, LPW rear end girdle, Metco d/s loop, A9L conversion, AFM PMS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fms valve covers	BLOCKER	Windsor Power	0	05-07-2003 08:34 PM
Painted valve covers	surfbeast	Modular Madness	3	04-23-2003 08:19 PM
3.8L ticking under the Valve Covers?	nostang forme	Small Ponies	2	01-02-2003 05:08 AM
Valve covers	rbatson	Windsor Power	8	06-10-2002 11:56 PM
Need some professional advice - head work, valve springs, rockers, cam. pretty long.	AxemanZZ	Windsor Power	15	01-11-2001 01:30 PM

05-19-2002, 12:18 PM	#4
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	It would depend on the height of the vc. I had to cut the baffle out of my stock vc's to make them fit w/ the rr's, but they fit fine now. If these are at least the same height as the stockers you should be fine, if they are not they won't work.