TURBO KITS!?!?!

1BALZGT · 07-05-2001, 10:11 PM

Looking for a good turbo kit. I like the cartech's, just can't decide between the street sleeper or the outlaw! If you run one of these kits please respond, i'd love to hear from you!! Any info. would be helpful
THANKS!!

Jeremy

silver_pilate · 07-05-2001, 11:26 PM

Have you checked out Incon? They have an awesome twin turbo kit for various mustangs. They make unreal power and they come with everything (fuel system, injectors, wires, intercooler...everything). The only thing is that they require a little fab work in the engine bay (cutting a notch in the frame-rail to be exact). There are a couple of guys running them on this board. I would have one if I had the $$$.

--nathan

------------------
--silver_pilate

'91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods...

Tried and True 302 Being Built to Outrun You! heh heh heh...
--Texas Panhandle--
Check out my site

Rick 91GT · 07-06-2001, 08:16 AM

I am looking at building a BUDGET turbo kit for myself by grabbing a turbo from a 85-86 T-bird and fabbing all the headers and tubes needed just to save the money...and since I have access to all the equipment needed. I can't wait I think it will be one hell of a ride with a turbo beind it, eventually I would upgrade to a larger turbo, but for now if I can get the budget deal rolling it would be cool.

But I was on e-bay yesterday doing a search in the auto section for "Turbo" there was a Icon kit there for sale for $2000 looked a little dirty but said it had been sitting. The new kits take around 4 months to get and the motre $$$ you put down the quicker I hear you get the kit. Then there was a really nice looking Single Cartech system for $1500 I think... Here's a link to another Turbo company I was looking at http://www.turbotechnologyinc.com/.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

07-05-2001, 10:11 PM	#1
1BALZGT Registered Member Join Date: May 2001 Location: Elida, OH Posts: 3	TURBO KITS!?!?! Looking for a good turbo kit. I like the cartech's, just can't decide between the street sleeper or the outlaw! If you run one of these kits please respond, i'd love to hear from you!! Any info. would be helpful THANKS!! Jeremy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo vs SC Sounds like good advice	mustardjohn	Small Ponies	0	11-16-2003 05:21 PM
Ran a turbo Integra, a Grand National, and two bikes!!!	WhiteT78Supra	Stang Stories	23	07-19-2002 07:21 AM
TurboCharger vs Supercharging	StangGT02	Modular Madness	4	07-09-2002 12:01 PM
Turbo kits?	84_GT350	Windsor Power	0	06-11-2001 04:07 AM
Used turbo kits alright????	smithbling	Windsor Power	3	01-18-2001 01:42 PM

07-05-2001, 11:26 PM	#2
silver_pilate DURKA DURKA!! Join Date: Sep 1997 Location: Lubbock, TX...(TX panhandle) Posts: 1,418	Have you checked out Incon? They have an awesome twin turbo kit for various mustangs. They make unreal power and they come with everything (fuel system, injectors, wires, intercooler...everything). The only thing is that they require a little fab work in the engine bay (cutting a notch in the frame-rail to be exact). There are a couple of guys running them on this board. I would have one if I had the $$$. --nathan ------------------ --silver_pilate '91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods... Tried and True 302 Being Built to Outrun You! heh heh heh... --Texas Panhandle-- Check out my site

07-06-2001, 08:16 AM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I am looking at building a BUDGET turbo kit for myself by grabbing a turbo from a 85-86 T-bird and fabbing all the headers and tubes needed just to save the money...and since I have access to all the equipment needed. I can't wait I think it will be one hell of a ride with a turbo beind it, eventually I would upgrade to a larger turbo, but for now if I can get the budget deal rolling it would be cool. But I was on e-bay yesterday doing a search in the auto section for "Turbo" there was a Icon kit there for sale for $2000 looked a little dirty but said it had been sitting. The new kits take around 4 months to get and the motre $$$ you put down the quicker I hear you get the kit. Then there was a really nice looking Single Cartech system for $1500 I think... Here's a link to another Turbo company I was looking at http://www.turbotechnologyinc.com/. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP