© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
07-31-2001, 01:25 AM | #1 |
Registered Member
Join Date: Jun 2001
Location: KC,Mo,US
Posts: 70
|
Where can I find info on a custom FMS chip?
I just wanted to find out some info about a custom made FMS chip.
------------------ 95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, 73mm C&L, 24lb injectors Aluminum Driveshaft, Tri-Ax shifter. |
07-31-2001, 09:13 AM | #2 |
Registered Member
Join Date: Jan 2001
Location: Moline Il
Posts: 901
|
Never heard of a fms chip. however there is a jms. check them out. jmschip.com
andy |
07-31-2001, 10:45 AM | #3 |
Registered Member
Join Date: Jun 2001
Location: KC,Mo,US
Posts: 70
|
JMS is what I meant to say thanks.
------------------ 95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, 73mm C&L, 24lb injectors Aluminum Driveshaft, Tri-Ax shifter. |
07-31-2001, 01:25 PM | #4 |
Guest
Posts: n/a
|
I would highly recommend a JMS chip. Does your car feel like it needs that extra "tuning"? Mine did, that's why I called Chris Johnson over there. He'll hook you up - at a good price to! ........sorry didn't mean to sound like a cheesy infomercial !
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach drag-launch spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; Cervini's 3" turbo hood; A/C-less; cat-less; 2 chamber Flos; Corbeau racing seats; FMS 30# injectors; JMS chip; Holley 190lb fp; TFS track heat Intake (12.299 @ 113 - 1.78 60') |
07-31-2001, 01:48 PM | #5 |
Registered Member
Join Date: Jun 2001
Location: KC,Mo,US
Posts: 70
|
Yes it does. The ideal surges every once in a while. I've mess with my fuel pressure and that helped alot but it still could be better. I have a NOS kit I'm going to be putting on but I don't want to hook it up until I know my car is in good running condition.
------------------ 95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, 73mm C&L, 24lb injectors Aluminum Driveshaft, Tri-Ax shifter. |
08-01-2001, 03:03 AM | #6 |
Registered Member
Join Date: Apr 1999
Location: Overland Park, KS, USA
Posts: 1,631
|
With your limited engine mods I doubt it'd make much of a difference. If I were you I'd go talk to the guys over at MC Racing in Merriam. They're great with electronics. I'm not sure if they could burn you a chip but they could steer you in the right direction.
------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s |
08-01-2001, 01:24 PM | #7 |
Guest
Posts: n/a
|
Once you mess w/ the intake/fuel/exhaust, many times a dyno tuned chip is all you need to make your car purr again. I was thinking that you have alot more air flowing now, w/ almost stock fuel delivery......you may need to raise your fuel pressure. What's it set at now? Is the MAF set up for the 24 lb injectors?
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach drag-launch spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; Cervini's 3" turbo hood; A/C-less; cat-less; 2 chamber Flos; Corbeau racing seats; FMS 30# injectors; JMS chip; Holley 190lb fp; TFS track heat Intake (12.299 @ 113 - 1.78 60') |
08-01-2001, 03:27 PM | #8 |
Registered Member
Join Date: Jun 2001
Location: KC,Mo,US
Posts: 70
|
Yes, the mass air is set up for the injectors. I'm running my fuel pressure at 34psi. When I first put the injectors and mass air on I left the fuel pressure at 40psi. But it seemed to be running rich. At least I think it was. After turning the pressure down it seemed to idle better and pull a little harder. I was thinking I may need to pull the plugs to see if I might have fowled any of them while running to much gas. Does anyone know how to tell if your running rich or lean.
------------------ 95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, 73mm C&L, 24lb injectors Aluminum Driveshaft, Tri-Ax shifter. |
08-01-2001, 04:32 PM | #9 |
Guest
Posts: n/a
|
Plugs could be the problem. As far as running rich/lean......does the engine knock? Do you have smoke coming out the tailpipes (after its been running) - and is there a heavy gas smell?
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach drag-launch spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; Cervini's 3" turbo hood; A/C-less; cat-less; 2 chamber Flos; Corbeau racing seats; FMS 30# injectors; JMS chip; Holley 190lb fp; TFS track heat Intake (12.299 @ 113 - 1.78 60') |
08-01-2001, 06:41 PM | #10 |
Registered Member
Join Date: Jun 2001
Location: KC,Mo,US
Posts: 70
|
No, it doesn't knock. And I haven't noticed any smoke. But I do however smell gas from the exhaust. I always run premium gas. But, i don't have any cats so I figured that was why I could smell gas.
------------------ 95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, 73mm C&L, 24lb injectors Aluminum Driveshaft, Tri-Ax shifter. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chip Vs. Programmer | xxxBlakexxx | Modular Madness | 18 | 12-30-2004 06:03 PM |
Diablo Chip Test | xxxBlakexxx | Modular Madness | 17 | 03-24-2004 05:37 AM |
Custom burned chip questions | 2FastLX | Windsor Power | 2 | 05-01-2001 03:45 AM |
where to find info on 65-72 Chevy's? | Hethj7 | Blue Oval Lounge | 1 | 02-12-2001 08:57 PM |
SUPER CHIP DEAL | RubY | Stang Stories | 0 | 01-21-2001 10:32 AM |