MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   306 1/4mile Time's (http://forums.mustangworks.com/showthread.php?t=1207)

88PONY 02-23-2001 09:08 AM

306 1/4mile Time's
 
I was wondering what all of you with naturally asperated 306 are running. My brother is interesed in building one,but I say he should do a 331-347 combo. Lets here the truth,since were the ones doing it.Lets see those slips. http://www.mustangworks.com/interact...rd/biggrin.gif

Thanks

------------------
88 NOTCH DSS 331CI C-4 BRAKE 4:10'S 11.5-1 DART IRON HEADS X-CAM 1.7 ROCKERS 8PT. CAGE BEST 10.9@125MPH 100% STREETALBE TO ME!!!

Jeff Chambers 02-23-2001 12:30 PM

11.99 seconds - 114.5 mph

Should have gone faster, that's for sure. Had problems with the guy on the shifter/clutch last year though that really held the car back. I swapped out the T5 for a Lentech AOD, so he should be able to drive the car better this year. Who are we kidding...the driver was me :^)

You can see last year's setup in the user's rides section here at MW.


------------------
Jeff Chambers
Trophy Stock #3
11.97 Seconds / 114.5 MPH
Chambers Racing Team

84_GT350 02-23-2001 01:23 PM

MM&FF's new issue attacks just such an issue. They run a 306 against a 347 carbed combo and dyno'ed them. All told, the 347 ran about 60hp better. With that being said, it depends on the design of the kit as to how well it'll run. All things being equal the 347 should run noticably harder. Although, 306s are cheaper for the more budget minded. And if you can make a 306 run as good or better than a 347, you've got that little added bit of respect. Personally, I'd do a 331. More power than a 306 but better rod/stroke ratio for increased longevity.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

Unit 5302 02-23-2001 03:19 PM

Not to mention you can still put the squeeze on a 331 for outrageous power. http://www.mustangworks.com/interact...board/wink.gif

mikos chris 02-23-2001 11:41 PM

My carbed 306 has gone 12.7@107, 3200LBS, Im hoping to go faster as everything is out of the box, completely untuned. Im hoping with some good tuning, maybe porting the heads to see 11s, but I think realisticly 12.2-12.3. GOOD LUCK

88PONY 02-26-2001 08:35 AM

Great info guys/gals! I appreciate the help.
I didn't think a 306 could go that far w/o a power adder.

Thanks

------------------
88 NOTCH DSS 331CI C-4 BRAKE 4:10'S 11.5-1 DART IRON HEADS X-CAM 1.7 ROCKERS 8PT. CAGE BEST 10.9@125MPH 100% STREETALBE TO ME!!!

86LX5liter 02-26-2001 09:43 AM

I went 12.5 at 110, with very basic stuff. Check out the specs below. If you have the coin though, i would build the 347

------------------
12.54 @ 110.90
1.62 60'
best with old car, will let you know once i finish the transfer to the new to me car

click here to see my car!



All times are GMT -5. The time now is 02:24 PM.