MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Nitrous Spark plugs (http://forums.mustangworks.com/showthread.php?t=44805)

289 11-29-2004 12:18 PM

Nitrous Spark plugs
 
Hi
I will be running a 80-100 wet shot and I was wondering what Spark plugs should I use can someone tell me a model number
Thanks

Fat0eknee 11-29-2004 05:22 PM

Re: Nitrous Spark plugs
 
the .99 cent autolites gapped at .035 should work nicely ...dont get platinum plugs or anything fancy as it will just get burned off

289 11-30-2004 08:24 AM

Re: Nitrous Spark plugs
 
I want the Autolite 24's correct

Fat0eknee 12-01-2004 02:29 AM

Re: Nitrous Spark plugs
 
dont know the number i just know they are the cheap ones - just ask the guy at the parts store, he'll know

~The Jester~ 12-02-2004 05:56 PM

Re: Nitrous Spark plugs
 
I run 25's for NA, and 24's on the squeeze. Gap is important, got a lot of fuel in there to light. You'll be just fine with the Autolites.

skiwesser 05-31-2005 01:08 AM

Re: Nitrous Spark plugs
 
I'm guessing you mean smaller gap on the spray?
What if your over 125 shot is autolite 24 cold enough?

mr49south 05-31-2005 03:51 PM

Re: Nitrous Spark plugs
 
run autolite 3922 they are the best 4 gas

Simi Stang 06-01-2005 12:10 PM

Re: Nitrous Spark plugs
 
Yes, the Autolite 24s are the ones you want...even with a 125 shot.

skiwesser 06-01-2005 01:15 PM

Re: Nitrous Spark plugs
 
What about a big shot say 175-200HP?

mr49south 06-01-2005 01:36 PM

Re: Nitrous Spark plugs
 
if u have twisted wedge heads 39 22 are the besr

Simi Stang 06-01-2005 01:59 PM

Re: Nitrous Spark plugs
 
Quote:

Originally Posted by skiwesser
What about a big shot say 175-200HP?

For that big of a shot I'd probably go with 23s, I guess. You'll have to retard the timing way down for that big of a shot. Is this a dry shot? Do you have the correct motor internals & fuel system to handle this 175-200 shot?

skiwesser 06-01-2005 04:50 PM

Re: Nitrous Spark plugs
 
No, I was just wondering if you'd go even colder on the plugs or just crank the timing way down.
I do plan to spray my rebuilt 306 with 175-185, with plenty of fuel of course.Forged pistons, stock everything else(crank & rods).
What do you think?
Should I get a main girdle? At least studs I figure.

Simi Stang 06-01-2005 08:00 PM

Re: Nitrous Spark plugs
 
I'd stick with a 150 shot. That'll take well over a second off of your quarter mile time with a big enough fuel pump & a properly set bottle warmer. Anything over that seems like you're pushin it in my opinion.

Fat0eknee 06-01-2005 08:53 PM

Re: Nitrous Spark plugs
 
150 is safe but its pushin it - stock rods are the weakest link

mr49south 06-02-2005 01:41 AM

Re: Nitrous Spark plugs
 
i run autolite 3922 plugs with timing on 14 works very well

Simi Stang 06-02-2005 11:49 AM

Re: Nitrous Spark plugs
 
Quote:

Originally Posted by mr49south
i run autolite 3922 plugs with timing on 14 works very well

Timing on 14 with the nitrous?! How big of a shot? Unless you're running some high octane fuel, that sounds pretty scary to me...

mr49south 06-02-2005 01:28 PM

Re: Nitrous Spark plugs
 
i am shooting a 150 shot on 93 pump gas .works very well.

Simi Stang 06-02-2005 02:05 PM

Re: Nitrous Spark plugs
 
So you're plugs look ok? No detonation I guess? That's amazing for a 150 shot. All we have here in So.Cal. is 91 octane. I've yet to experiment with race fuel & more timing. My 150 shot on 91 octane with my timing on 9 is plenty for me. I don't want to damage any of my motor internals. That's great that you can pull that off though. What are your 1/4 mile times mr49south?

mr49south 06-02-2005 03:35 PM

Re: Nitrous Spark plugs
 
well we only have an 1/8 trackand i went 7.39 ,97.8mphon a 125 shot leaving on idle with bf drag radials.on the 150 shot leaving at 3200 with 150 shot went a 6.92,at 102.5 .getting ready 2 try a 175next time out.

Simi Stang 06-02-2005 04:42 PM

Re: Nitrous Spark plugs
 
That's pretty impressive. What all is done to your motor & fuel system mr49south? Have you checked your plugs after a nitrous run, or at least once you get back from the track? How do they look? No flakes of aluminum melted onto the electrodes, right? LOL. Just kidding...I'm curious to see how the 175 shot will work for you. So do you retard your timing at all from regular on motor runs? I highly suggest you retard it at least a few degrees on the 125-175 shots. But...who knows, maybe that 93 octance is helping out bigtime.


All times are GMT -5. The time now is 09:41 PM.