Stock Head Porting...
 

I am going to have my heads rebuilt on my '89 LX. I was thinking about getting them ported instead of dropping $1000 plus on aftermarket heads. What is the best way to explain the port work that I want done to a machine shop? I have a fairly stock motor except for a few bolt ons. I am trying to start with the heads and work from there. I am not after huge HP gains. Just better flowing heads that will yield better power with minor bolt ons.

Mods so far...
MAC CAI
Off road H-pipe
2 chamber flows
3.55 gears

------------------

Just tell them exactly what you just told us. Mention matching the ports, too.

Take care
~Chris

------------------
Retired Moderator
MustangNet

My site: JimPorterRacing

RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!

Match the ports of the lower intake to the heads, or the exhaust/intake ports on the heads? Thanks Chris. You are always helpful.

Don't forget to tell them to take out the hump in top of exhaust port. Gasket match lower intake to intake side of head. Tapper into head about an inch. Smooth out any rough areas and if not to much money do some bowl blending. If you can get die grinder and some burs. Summit sells a book that is very helpfull in doing this yourself. Takes some time but a lot less money.

------------------
Edward VanCura, Amsoil dealer. For information about amsoil synthetic oil and lubes leave me a message. Ask about preffered customer program and buy at dealer cost.

Those are all good points. I was referring to having the intake ports matched to the lower intake.

Take care
~Chris

------------------
Retired Moderator
MustangNet

My site: JimPorterRacing

RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!

It's probaly going to cost $500+ to have your heads ported. Just save up a little more and get some TRICK FLOW's , or AFR's. Ported stockers can't touch those.

------------------
1989 GT, 3:55's, full exhaust, 4 in. hood, Pro 5.0, Have many other parts 4 sale. All parts for sale now.

2000 Camaro SS-A4, 13.7's bone stock.

1989 Chevy S-10, EX. Cab-383(500+hp on motor), trick flow heads, trick flow pistons, etc... autometer phantom gauges, "built" 700R4, roll cage, lexan back window, corbeau seats, R.H.S. 5 harnesses, Fuel cell, convo pro wheels, 15x14's with 29x18.5 M/T'S on back, 15x4's on front, nitrous, and so much more!