Chris,
It seems as though I have one of the problems you described in your vacuum diagnosis thread:
" A low but steady reading between 10" and 15" would be caused by retarded ignition or valve timing, or low compression."
-This vacuum reading is taken off of the brake booster
My timing is set to 18*
Compression is 150 PSI cold fairly consistent all cylinders
not sure on valve timing.
If when I set my cam timing I kind of half assed the whole procedure, and did not perfectly line up the timing gear w/ TDC, could this be causing my problem.
It may also be important to mention I have 18-20 inches mercury vacuum cruising on the highway.
__________________
96 Cobra - a bit too stock. 14.0 @ 101
|