MustangWorks.com : Ford Forums - View Single Post

MEDIK418 · 10-11-2002, 10:59 PM

I just did this not too long ago. Go to someplace like Harbor Freight and look into a slide hammer kit. It has these neat little expander plugs that will fit into the hole very nicely. They expand outward enough to slam the thing out. It's in there real good but with a minimum of patience it should pop right out.
And yes, I'm still alive. . . a lot older now but still alive.

10-11-2002, 10:59 PM	#12
MEDIK418 Registered Member Join Date: Mar 1999 Location: Amarillo, Texas, USA Posts: 780	I just did this not too long ago. Go to someplace like Harbor Freight and look into a slide hammer kit. It has these neat little expander plugs that will fit into the hole very nicely. They expand outward enough to slam the thing out. It's in there real good but with a minimum of patience it should pop right out. And yes, I'm still alive. . . a lot older now but still alive. __________________ 1986 four-eyed LX coupe, 358 Cleveland, Tremec TKO600/centerforce clutch, dish cut Probe forged pistons, comp cams hyd.roller cam, .579/.588@224/230, Edel.performer, 670 holley street avenger, CPR custom built long tubes, ported and polished 4bbl heads, manley valves, beehive springs, MSD peo-billet dist/MSD6AL, fluidamper, 5 lug conv. with 17x8 bullits there's more but it's still not finished yet. Oh, and the oldest boy is turning his 89 GT into a FFR cobra this next summer.