MustangWorks.com : Ford Forums - View Single Post

Conman · 12-03-2002, 08:33 PM

you don't need that sensor on the top. From the inside it looks like it will determine when the tranny is in neutral, which you don't need. When I did my rebuild that harness was not plugged in and it was damaged so I just took it right out and plugged the hole.

I think you could tap into this switch if you wanted to install a remote starter. This way the car won't do a kangaroo hop across the parking lot if left in gear.

The harness on the side is the reverse switch and you need it if you want reverse lights.

12-03-2002, 08:33 PM	#5
Conman Registered Member Join Date: Apr 2002 Location: Kingston, Ontario Posts: 351	you don't need that sensor on the top. From the inside it looks like it will determine when the tranny is in neutral, which you don't need. When I did my rebuild that harness was not plugged in and it was damaged so I just took it right out and plugged the hole. I think you could tap into this switch if you wanted to install a remote starter. This way the car won't do a kangaroo hop across the parking lot if left in gear. The harness on the side is the reverse switch and you need it if you want reverse lights. __________________ '88 lx, Black on Black, check it out here Spent all my money on school, what a dumb mistake I'm old enough to know better, but still too young to care.