MustangWorks.com : Ford Forums - View Single Post - Does anyone know how to test a neutral switch on the WC T-5?

MustangGT1990 · 12-11-2002, 03:36 PM

Ok, here is what I have...a 1990 GT with a factory WC T-5. It is not an auto conversion. It has a side mounted backup switch AND a neutral switch that is located on top of the transmission towards the bellhousing. It has about a 6 inch long lead that hangs down in the same area as the backup switch. The harness has a connector that it plugs in to. The switch is denoted as #6 in the diagram.

Here is a pic of what I'm talking about:

Thanks!

12-11-2002, 03:36 PM	#3
MustangGT1990 Registered Member Join Date: Mar 2002 Location: Oliver Springs, TN Posts: 31	Ok, here is what I have...a 1990 GT with a factory WC T-5. It is not an auto conversion. It has a side mounted backup switch AND a neutral switch that is located on top of the transmission towards the bellhousing. It has about a 6 inch long lead that hangs down in the same area as the backup switch. The harness has a connector that it plugs in to. The switch is denoted as #6 in the diagram. Here is a pic of what I'm talking about: Thanks! __________________ 1990 Mustang GT 25th Anniversary Edition, 5 speed, 5.0 bored .030" over, FRPP 65mm throttle body, FRPP 1.6 roller rockers, 70 mm MAF, Compcams XE264HR, FRPP Aluminum driveshaft, FRPP Heavy duty clutch, BBK offroad H-pipe, Dual-chamber Flows, Energy Suspension engine and tranny mounts Last edited by MustangGT1990; 12-11-2002 at 07:54 PM..