MustangWorks.com : Ford Forums - View Single Post

fiveohpatrol · 02-10-2003, 09:41 AM

The cable that is closest to the drivers side is your throttle cable, and you already have it removed.

The other cable is called the Throttle Valve(TV) and you must NOT adjust this cable because you will most likely fry your AOD if it is mis-adjusted. Don't try adjusting it to get firmer shifts.

It will pop out of the grommet with just a little force from a flathead screwdriver. Then your new TB should already have the rubber grommet in place. Just pop it in the new one and you're all set.

02-10-2003, 09:41 AM	#5
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	The cable that is closest to the drivers side is your throttle cable, and you already have it removed. The other cable is called the Throttle Valve(TV) and you must NOT adjust this cable because you will most likely fry your AOD if it is mis-adjusted. Don't try adjusting it to get firmer shifts. It will pop out of the grommet with just a little force from a flathead screwdriver. Then your new TB should already have the rubber grommet in place. Just pop it in the new one and you're all set. __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft