12's with a 4v isn't all that hard to achieve. Longtubes and X pipe are both good places to start but gearing needs to be at least 4.30's or 4.56's. This isn't like a 5.0 that runs out of steam at 5000 RPM's the 4v 4.6 is just starting to breath at that RPM and needs to be wound out to 7K RPM to take advantage of the power band. I'd say get the basics like pulleys, timing adjuster, K&N plus the exhaust you mentioned, gears and a good set of tires and your there with some practice at the track. Slicks would be the best but it can be done on DRs.
Bill
__________________
2000 GT
VRS O/R X, Dynomax Bullets, Steeda Pulleys, Pro-M 80MM, 4.30s, UPR Pro Series Suspension, UPR Tubular K-member, MAC Longtubes, Bullitt Intake, TKO, VT Engine Stage 1 NA Cams, SCT Tune.
285 RWHP/296 RWTQ
11.97 @ 113.20
M/M 100, 7085
www.uprproducts.com
www.ponyexpressperformance.com
www.modulardepot.com
|