[Hozer 88GTConv]

I r/r my intake manifold again. With 1250's there seems to be a little oil coming up from the lifter valley on number 5 underneath the gasket.
I put new ones on with a silicone bead around the intake port on number 5 to boot. Hopefully that'll take care of it.
Everything else looked good.
Still runs rich as hell, got fuel pressure down to 35 psi at idle w/ vacuum off of fpr.
Oh well, enough for today. Going to re-adjust the timing, it idled pretty low, think I'm off a couple of degrees.
I'll let you know...