the ford badge on the trunk has three holes under it they aren't very big but they will need to be filled or they will rust... the 5.0 badges are easy to remove... just peel them off being carefull of the paint under them... they may leave some double sided tape but that easy to take off... either use a hairdryer to heat them up and rub it off or use oil, because tape/stickers have an oil based adhesive and oil will disolve it and they will again rub right off... hope this helps... i did mine, pretty easy
Phantom
------------------
1983 GLX Convertible 5-Speed, knife-edged crank, internally balanced, TRW 11:1, custom cam, ported Windsor Jrs, Manley Valves, CCs roller lifters, dual springs, ARP stud kit, 600cfm Edelbrock Torker 2, Mallory Ignition, Canton 7qt traps windage tray baffles, Hooker Super Comp Headers 1 5/8 primaries 3" collectors, Flowmasters, K&N, ASP puleys, Maximum Motorsports C/Cs strut tower K member brace, through floor subframes, Grant wheel, billet pedals, 93 seats, Keystone rims
|