cowl hood??

blk88lx · 12-16-2002, 09:05 PM

I have a basically stock 351W (aside froma a GT-40 lower and a cobra upper) which is going into a 93 GT. I did this swap with an 86 Capri and the breather tapped the hood. Just a bit. Can I get away w/the stock hood if the engine is EFI. Dread having to go to a cowl. Not only will it be $ I could spend somewhere else, I heard the fiberglass crap sucks on a street car? I had heard that there were drop mounts for this install. Is that true?

cyberstang5.0 · 12-16-2002, 09:47 PM

Well, I don't have a 351, but I do have a high sitting intake on my 347. I have a 3" cowl and just have enough room for it to clear. I have never heard of drop mounts but that doesn't mean they don't exist. If you do drop your motor, you'll have to worry about your oil pan hitting things. Also, about the fiberglass... I have a fiberglass hood and I have never had any problems. You get what you pay for. I would stick with Cervinis or Harwood for an aftermarket hood. They have the best fit and best quality out there. Also, when you get it painted, if they put crappy paint on there, the heat will make it bubble up, so watch out for that.

fiveOguy20 · 12-16-2002, 10:46 PM

ya man, bite the bullet an get cowl, they look mean

also H0 fibertrends are a really brand also

blk88lx · 12-16-2002, 11:07 PM

All right, I'll look around for a cowl. thanks.

12-16-2002, 09:05 PM	#1
blk88lx Registered Member Join Date: Jun 2001 Location: Fort Leonard Wood, MO Posts: 179	cowl hood?? I have a basically stock 351W (aside froma a GT-40 lower and a cobra upper) which is going into a 93 GT. I did this swap with an 86 Capri and the breather tapped the hood. Just a bit. Can I get away w/the stock hood if the engine is EFI. Dread having to go to a cowl. Not only will it be $ I could spend somewhere else, I heard the fiberglass crap sucks on a street car? I had heard that there were drop mounts for this install. Is that true? __________________ 93 GT, 5.8 EFI usual bolt ons, 3.55's, subs, hurst, K+N 78 F100 Short bed, 5.8, dual pipes 4 bbl 03 Sable

12-16-2002, 11:07 PM	#4
blk88lx Registered Member Join Date: Jun 2001 Location: Fort Leonard Wood, MO Posts: 179	All right, I'll look around for a cowl. thanks. __________________ 93 GT, 5.8 EFI usual bolt ons, 3.55's, subs, hurst, K+N 78 F100 Short bed, 5.8, dual pipes 4 bbl 03 Sable

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cervinis cowl hood	Ieatcamaros	Windsor Power	3	02-10-2004 07:55 PM
My Review on Motion Performance Parts Hoods	Fox Body	Blue Oval Lounge	8	11-22-2001 05:10 PM
Help! Hood won't fit! Cowl hood guys please read!	daveGT	Windsor Power	3	08-21-2001 07:49 AM
Cowl hood opening problems	Mach 1	Windsor Power	1	04-25-2001 07:49 PM
where to find a cowl hood for this........	mikos chris	Windsor Power	0	04-01-2001 02:53 PM

12-16-2002, 09:47 PM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	Well, I don't have a 351, but I do have a high sitting intake on my 347. I have a 3" cowl and just have enough room for it to clear. I have never heard of drop mounts but that doesn't mean they don't exist. If you do drop your motor, you'll have to worry about your oil pan hitting things. Also, about the fiberglass... I have a fiberglass hood and I have never had any problems. You get what you pay for. I would stick with Cervinis or Harwood for an aftermarket hood. They have the best fit and best quality out there. Also, when you get it painted, if they put crappy paint on there, the heat will make it bubble up, so watch out for that.

12-16-2002, 10:46 PM	#3
fiveOguy20 Registered Member Join Date: Sep 2002 Posts: 156	ya man, bite the bullet an get cowl, they look mean also H0 fibertrends are a really brand also