Is There A Way To Make My Car Sound Like It Has A Blower????????

BowTie Eater 5 Liter · 06-29-2001, 12:07 AM

I want that high pitched whine when i rev it up, but cant afford a real blower. is there any way i could put some sort of belt driven thing on the motor that would have that whistle sound when i rev it?

i would like this because then at lights, i could rev it, & everyone would think i have a blower!!!

thanks

06-29-2001, 01:17 AM

Replace your regular timing chain with a gear-drive,that will give you the sound your looking for

Be careful though,cause guys like myself,if we hear a simliar sound in the next lane over,we just might see how bad that blower sounding car is

------------------

Paxton Blown 87GT
ICQ:91504337

06-29-2001, 01:55 AM

mustanguy is right, basically other than an actual blower a gear drive is the closest you'll get.

------------------
'84 Mustang 5.0 LX
My car

Skyman · 06-29-2001, 02:06 AM

Gear drive, but why?

Sky

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

84_GT350 · 06-29-2001, 02:38 AM

Ditto. Gear drives. They use straight cut gears just like the inside of a blower to keep your timing dead on, but they also make a very similar noise.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

smokedchevy · 06-29-2001, 02:42 AM

They sound cool but you'll be asking for trouble. Then every guy that beats you is going to brag about how he beat a blown stang, when in reality, a blown stang is hard to beat! I raced a Nova recently and he fired his engine up and I heard the gear drive, I made a comment about how his power steering pump needed fluid. He got mad and wanted to run'em. I started my car and my powerdyne is silent, boy did he get his but whooped. Moral, stealth is cool.

------------------
92 GT, 4:10 gears, centerforce clutch, 6# powerdyne blower, bbk h-pipe, flowmasters

red82gt · 06-29-2001, 02:44 AM

I won't miss a chance with a blower car and damn it's sweet when you beat them! Dude, frontin' like you've got a blower would make you a poser, Don't be a poser! Leave the frontin' for the ricers.

------------------
GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B&M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty!

[This message has been edited by red82gt (edited 06-29-2001).]

06-29-2001, 12:07 AM	#1
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	Is There A Way To Make My Car Sound Like It Has A Blower???????? I want that high pitched whine when i rev it up, but cant afford a real blower. is there any way i could put some sort of belt driven thing on the motor that would have that whistle sound when i rev it? i would like this because then at lights, i could rev it, & everyone would think i have a blower!!! thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which gears for a blower?	92LimEd	Windsor Power	4	10-07-2002 10:12 AM
96 to 98 gt with a vortech blower ,, have a question 4 you !	southernstang97	Modular Madness	8	07-31-2002 05:52 PM
Engine Sound	gantrexx	Windsor Power	10	04-10-2002 10:09 AM
weird sound after MAC cold air installation	CobraFire98	Modular Madness	5	12-28-2001 04:19 PM
Attn: N2O and Blower Guys......	bigwhitecobra	Blue Oval Lounge	7	09-21-2001 02:34 PM

06-29-2001, 01:17 AM	#2
Mustanguy Guest Posts: n/a	Replace your regular timing chain with a gear-drive,that will give you the sound your looking for Be careful though,cause guys like myself,if we hear a simliar sound in the next lane over,we just might see how bad that blower sounding car is ------------------ Paxton Blown 87GT ICQ:91504337

06-29-2001, 01:55 AM	#3
84stangLX Guest Posts: n/a	mustanguy is right, basically other than an actual blower a gear drive is the closest you'll get. ------------------ '84 Mustang 5.0 LX My car

06-29-2001, 02:06 AM	#4
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Gear drive, but why? Sky ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.55@107 Motor

06-29-2001, 02:38 AM	#5
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Ditto. Gear drives. They use straight cut gears just like the inside of a blower to keep your timing dead on, but they also make a very similar noise. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

06-29-2001, 02:42 AM	#6
smokedchevy Registered Member Join Date: Jun 2000 Location: ventura,CA Posts: 438	They sound cool but you'll be asking for trouble. Then every guy that beats you is going to brag about how he beat a blown stang, when in reality, a blown stang is hard to beat! I raced a Nova recently and he fired his engine up and I heard the gear drive, I made a comment about how his power steering pump needed fluid. He got mad and wanted to run'em. I started my car and my powerdyne is silent, boy did he get his but whooped. Moral, stealth is cool. ------------------ 92 GT, 4:10 gears, centerforce clutch, 6# powerdyne blower, bbk h-pipe, flowmasters

06-29-2001, 02:44 AM	#7
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	I won't miss a chance with a blower car and damn it's sweet when you beat them! Dude, frontin' like you've got a blower would make you a poser, Don't be a poser! Leave the frontin' for the ricers. ------------------ GT-40 heads (ported, polished, + milled), B303 cam, 1.7rr's, JE pistons, Offy intake, Carter AFB 625cfm carb, Flowtech 1 5/8" shortys, Flowtech X-pipe, MAC Flowpath exhaust, MAC pulleys, 373's, subframes, Eibachs+Tokicos, B&M ripper, FMS Clutch, Zoom Quadrant+cable, 17" CSA Ultra rims, 235/45ZR17 Yokohama AVS S4's, MSD 6A ignition+coil, FMS 9mm wires, Carbed, Naturally Aspirated, and Nasty! [This message has been edited by red82gt (edited 06-29-2001).]