Anyone shipped wheels? From USA to Canada?

88COBRA · 07-10-2001, 07:09 AM

I am looking at getting a set of AFS 4 Lug Cobra R wheels, and tires.

How much do you think one of the whels/tires weighs?

Has anyone shipped large items across the border? Anything happen? How much did it come out to?

Here is my guess:
US$
Wheels/Tires $1,000.00
total $1,000.00

CDN$
Wheels/Tires $1,560.00
Shipping $200.00
Brokerage $40.00
Taxes $234.00

Total $2,034.00

What do you think? Did I forget anything?

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
Visit my site:
http://www.stangpower.com

07-10-2001, 04:29 PM

I've only shipped tires (my Nittos) from the US & they came via UPS ground alot faster than expected & looking good.

Rims shouldn't be all that heavy if they ship them in separate boxes.

------------------
91 coupe
3.73's,long tubes,2 1/2" exh,ported stock t-body,ProM-77mm
cobra intake,edelbrock heads,B303,1.72 rr's
36lb inj's,tremec, & a Paxton NOVI 2000!!!
11.020 @128.95 on BFG Drag Radials (275/60/15)

[This message has been edited by SisuStang (edited 07-10-2001).]

Skankin · 07-10-2001, 04:35 PM

Wheels are about 22#, without tires.

There's a place in Brantford Ontario that has new take-offs at GREAT prices ($1800+tax Canadian I think). It'll all be 5 lug, but they may have some aftermarket stuff too. They advertise in the Tri-ad (I think it's been renamed now).

These are just across the border in Michigan, and have some good prices:
http://www.buyfordmotorsport.com/ http://www.karkraft.com/ (5lug Roush wheels & tires for $699!!!!)

Diversified Marketing Solutions has take-off stuff at incredible prices too! (800-995-4003) You can get the 99/00 calipers for $30 each, and rotors for $10 each (you need 94+ spindles etc).

85cobra · 07-14-2001, 12:41 PM

I seen some guy in Toronto with the 4 lug cobra r's that you're looking at. He must have ordered them locally cuz shipping anything over the border is a ***** .

------------------
1985 Mustang GT Cobra
Mostly stock. Flowtech 1 5/8" lontubes, flowtech h-pipe, Flowmaster two chambers, Mac 2.5" tailpipes, MSD-6AL with Blaster coil, Weiand Stealth intake, Eibach springs, Monroe Formula GP's.

88COBRA · 07-14-2001, 09:28 PM

Track him down and ask please!

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
Visit my site:
http://www.stangpower.com

85cobra · 07-15-2001, 03:50 PM

Sure thing.

elmir50 · 07-15-2001, 05:44 PM

I live close to the US boerder so I ship stuff to a Shipping place located on the US side and then pick it up myself and take it through the border. I ordered stuff from Summit since they ship to the continental US for free. If the purchased item is made in north america then you only have to pay the taxes, no duty. So, if you live close to the border then you may want to consider this option.

88COBRA · 07-15-2001, 10:45 PM

Thanks for all the replies.

Any more comments?

I have found a used set of 16" pony rims in B.C, I hope to get those. I have always liked the look of those pony's

Ian

------------------
Ian Sim
webmaster@stangpower.com
STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded
Visit my site:
http://www.stangpower.com

07-10-2001, 07:09 AM	#1
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	Anyone shipped wheels? From USA to Canada? I am looking at getting a set of AFS 4 Lug Cobra R wheels, and tires. How much do you think one of the whels/tires weighs? Has anyone shipped large items across the border? Anything happen? How much did it come out to? Here is my guess: US$ Wheels/Tires $1,000.00 total $1,000.00 CDN$ Wheels/Tires $1,560.00 Shipping $200.00 Brokerage $40.00 Taxes $234.00 Total $2,034.00 What do you think? Did I forget anything? Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded Visit my site: http://www.stangpower.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheels and Tires...HELP !	Mass Stang	Blue Oval Lounge	6	09-04-2003 11:48 AM
Weld Racing Wheels/ Street Wheels	jmjett01	Modular Madness	0	03-07-2003 11:45 AM
15" Wheels on GT?	2000GT-5spd	Modular Madness	4	08-22-2002 12:08 PM
18" Mustang Wheels & Tires Selling Cheap!!!	steedamustang01	Modular Madness	0	05-15-2002 11:31 AM
wheels?	Lightspeed	Classic Mustangs	6	05-14-2002 10:10 PM

07-10-2001, 04:29 PM	#2
SisuStang Guest Posts: n/a	I've only shipped tires (my Nittos) from the US & they came via UPS ground alot faster than expected & looking good. Rims shouldn't be all that heavy if they ship them in separate boxes. ------------------ 91 coupe 3.73's,long tubes,2 1/2" exh,ported stock t-body,ProM-77mm cobra intake,edelbrock heads,B303,1.72 rr's 36lb inj's,tremec, & a Paxton NOVI 2000!!! 11.020 @128.95 on BFG Drag Radials (275/60/15) [This message has been edited by SisuStang (edited 07-10-2001).]

07-10-2001, 04:35 PM	#3
Skankin Registered Member Join Date: Dec 1998 Location: London, Ontario, Canada Posts: 1,349	Wheels are about 22#, without tires. There's a place in Brantford Ontario that has new take-offs at GREAT prices ($1800+tax Canadian I think). It'll all be 5 lug, but they may have some aftermarket stuff too. They advertise in the Tri-ad (I think it's been renamed now). These are just across the border in Michigan, and have some good prices: http://www.buyfordmotorsport.com/ http://www.karkraft.com/ (5lug Roush wheels & tires for $699!!!!) Diversified Marketing Solutions has take-off stuff at incredible prices too! (800-995-4003) You can get the 99/00 calipers for $30 each, and rotors for $10 each (you need 94+ spindles etc).

07-14-2001, 12:41 PM	#4
85cobra Registered Member Join Date: Mar 1999 Location: Vaughn,Ontario,Canada Posts: 23	I seen some guy in Toronto with the 4 lug cobra r's that you're looking at. He must have ordered them locally cuz shipping anything over the border is a ***** . ------------------ 1985 Mustang GT Cobra Mostly stock. Flowtech 1 5/8" lontubes, flowtech h-pipe, Flowmaster two chambers, Mac 2.5" tailpipes, MSD-6AL with Blaster coil, Weiand Stealth intake, Eibach springs, Monroe Formula GP's.

07-14-2001, 09:28 PM	#5
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	Track him down and ask please! Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded Visit my site: http://www.stangpower.com

07-15-2001, 03:50 PM	#6
85cobra Registered Member Join Date: Mar 1999 Location: Vaughn,Ontario,Canada Posts: 23	Sure thing.

07-15-2001, 05:44 PM	#7
elmir50 Registered Member Join Date: Mar 1999 Location: Tsawwassen BC Canada Posts: 413	I live close to the US boerder so I ship stuff to a Shipping place located on the US side and then pick it up myself and take it through the border. I ordered stuff from Summit since they ship to the continental US for free. If the purchased item is made in north america then you only have to pay the taxes, no duty. So, if you live close to the border then you may want to consider this option.

07-15-2001, 10:45 PM	#8
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	Thanks for all the replies. Any more comments? I have found a used set of 16" pony rims in B.C, I hope to get those. I have always liked the look of those pony's Ian ------------------ Ian Sim webmaster@stangpower.com STORED: 1988 Mustang GT "Canadian Cobra", stock, AOD, loaded Visit my site: http://www.stangpower.com