© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
08-05-2005, 08:08 AM | #1 |
Registered Member
Join Date: May 2005
Location: York, PA
Posts: 46
|
90/10's on the street
I know in all the catalogs they say 90/10 struts are not for street use. I was wondering are they ok for the street and if anyone has them on their street car?
Thanks Brian
__________________
1990 Notch, 306, T-56 trans, 3:73 gears, zex 100 shot, gt-40,z-303 cam, roush 200 heads, powerdyne on the way |
08-09-2005, 07:01 AM | #2 |
Registered Member
Join Date: Sep 2002
Location: southeast texas
Posts: 90
|
Re: 90/10's on the street
rough .....period
__________________
AFR 1492 heads,Track Heat Intake, d.s.s super pro bullet 331, lakewood bell, king cobra, 3550 ,UPR shifter, aluminum shaft, 4.10, 31-spline, spool,hoosier27x10, moroso ds-2, 175-juice, egt...11.40 on motor spray pass coming. |
08-09-2005, 07:13 AM | #3 |
Registered Member
Join Date: Mar 2003
Location: Saint Louis, MO
Posts: 634
|
Re: 90/10's on the street
sucks - get adjustable struts and you can have it both ways.
__________________
Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/ |
08-09-2005, 01:13 PM | #4 |
Registered Member
Join Date: Apr 2001
Location: Gallatin, Tn
Posts: 1,326
|
Re: 90/10's on the street
Wierd, I have no complaints.
__________________
|
08-15-2005, 10:04 AM | #5 |
Sniffed too much n20
Join Date: Oct 1998
Location: Ont, Canada
Posts: 1,018
|
Re: 90/10's on the street
I've had 70/30s on the street and switched to 90/10s, a little rougher but no complaints here.
__________________
2002 Windsor Weekend Q16 Qualifier |
08-15-2005, 11:08 AM | #6 |
Registered Member
Join Date: May 2005
Location: York, PA
Posts: 46
|
Re: 90/10's on the street
Well I installed my 90/10's and I don't really have any complaints either.
__________________
1990 Notch, 306, T-56 trans, 3:73 gears, zex 100 shot, gt-40,z-303 cam, roush 200 heads, powerdyne on the way |
08-16-2005, 08:24 AM | #7 |
Registered Member
Join Date: Apr 2005
Posts: 37
|
Re: 90/10's on the street
they work fine on my car as well
__________________
89 LX TFS STREET KILLER stock block,twisted wedge heads, eldo intake, 24lb inj., 75tb, 73 mass air, comp cam, 4.10 gear, lakewood 90/10,50/50, 150 shot of gas. |
08-16-2005, 03:01 PM | #8 |
Guest
Posts: n/a
|
Re: 90/10's on the street
To all of you that have the 90/10s & drive on the street...what kind of springs do you have? Drag springs? With drag shocks & springs I'd imagine that going around turns at even a moderate speed would be unstable, no? What about going over bumps or through intersections with dips? I can't imagine a full drag suspension set up would feel good on the street. Do tell...
|
08-16-2005, 04:11 PM | #9 |
Registered Member
Join Date: Aug 1999
Location: New Port Richey, Florida
Posts: 483
|
Re: 90/10's on the street
I had Strange 10 way adjustable on my 92 and they were great. I could change the settings in 5 minutes without a jack or tools. The best part is I could get killer weight transfer to play around with then switch back to a more street friendly setting. Felt like the front end would float on overpasses when on a drag setting. Hope this helps
__________________
1969 Mach 1 351C with a c6(for now) Sold 92 Rag Top GT Procharged & intercooled DSS 331 LC Holley Systemax 2 Intake, Edelbrock RPM Heads,E 303 ,blow thru air meter, race bypass, 42 pph injectors,65mm tb,1.7 rr, Mac long tube headers w/off road H pipe, Force 2 catback, TKO,Pro 5.0, K&N, Alum DS,3 core radiator, subframe connectors,3.73`s, Nitto DR`s and a Heavy Foot. |
08-17-2005, 02:04 PM | #10 | |
Guest
Posts: n/a
|
Re: 90/10's on the street
Quote:
What about the rest of you guys that replied to this post? What spring set up are you running with your 90/10s? |
|
08-18-2005, 08:05 AM | #11 |
Registered Member
Join Date: May 2005
Location: York, PA
Posts: 46
|
Re: 90/10's on the street
i have eibach drag launch springs on mine, I am unsure about them currently because of the dam wheel hop.
__________________
1990 Notch, 306, T-56 trans, 3:73 gears, zex 100 shot, gt-40,z-303 cam, roush 200 heads, powerdyne on the way |
08-18-2005, 10:34 AM | #12 | |
Domestic Rice really sucks!
Join Date: Apr 2002
Location: KY
Posts: 973
|
Re: 90/10's on the street
Quote:
__________________
The sig says it all. |
|
08-18-2005, 11:10 AM | #13 |
Registered Member
Join Date: May 2005
Location: York, PA
Posts: 46
|
Re: 90/10's on the street
No i do not have the quad shocks on. I called eibach and they said the quad shocks shouldn't make a difference. They blamed in on my tires pretty much
__________________
1990 Notch, 306, T-56 trans, 3:73 gears, zex 100 shot, gt-40,z-303 cam, roush 200 heads, powerdyne on the way |
08-25-2005, 09:11 PM | #14 | |
Registered Member
Join Date: Jan 2005
Posts: 3
|
Re: 90/10's on the street
Quote:
|
|
08-27-2005, 07:22 PM | #15 |
Rat Killer
Join Date: Aug 2002
Location: Cold ass Ohio
Posts: 1,143
|
Re: 90/10's on the street
95% of the sht on my car is "not for street use", but she still has liscense plates...
Run it!!
__________________
d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply..... |
08-28-2005, 11:13 AM | #16 | |
Domestic Rice really sucks!
Join Date: Apr 2002
Location: KY
Posts: 973
|
Re: 90/10's on the street
Quote:
__________________
The sig says it all. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where to street race in Dallas/Fort Worth-Tx??? | keithclements | Stang Stories | 4 | 06-04-2010 02:56 PM |
Texas Street racing shutdown???!? | FivepointOH | Stang Stories | 9 | 09-29-2003 02:23 PM |
Real Street race Sept 19th Holt, Florida | Jubi351 | Ford Show & Go | 0 | 09-06-2003 05:01 PM |
what size street slicks will fit on my 10 hole wheels? | Chevysucks | Windsor Power | 2 | 09-18-2002 02:16 PM |
2000 Street Stock - the $15,000 question | Tim Miller | Racer's Club House | 4 | 10-20-1999 07:09 PM |