Accufab 70mm plenum/throttle body.

acidskie · 02-09-2004, 07:47 PM

I saw this on a web site. They were claiming "the NEW Accufab 70mm plenum + 70mm throttle body, for the ultimate intake combination! Combined power of 10HP / 15TQ on bolt on GT!"

Its around 450 for both before shipping and is only 10 rwhp.

Can anyone vouch for these numbers? and is 10 hp good for $450 bucks? Anyone know of a better brand/better results/lower price?

I'm still looking around, but I am going to get the steeda shifter, some "show" items, and am still looking into a few other things. I also saw on the same site that the mustang gt had 252 hp baseline. I know the 260 claimed is crank hp. has anyone dyno'd a stock gt? what was your hp?

also the steeda underdrive pulleys. Do they really give you 8-10 hp as claimed?

I know it this is getting long... so i will stop here for now

blue00gt · 02-09-2004, 08:04 PM

Stock GT's tend to dyno in the neighborhood of 230 rwhp with a 5-speed.
If you do a search on corral.net, there is alot of discussion and dyno results there on the various upper intake plenums made for 2V's (Accufab, C&L, Trick Flow, Dragon, etc.). They seem to be a good bang for the buck mod.
As for underdrive pullies, they are definitely high up there on the bang for the buck list and from what I have seen they do give you the gains they claim.

xxxBlakexxx · 02-09-2004, 09:21 PM

I second Blue GT.

One nice thing about the TB's and the plenums is that they can support additional mods down the road. I mean to say, they can help them work better. Also, they improve torque nicely through the power bands too.

explicitone · 02-10-2004, 05:33 PM

Quote:

Originally posted by acidskie
I saw this on a web site. They were claiming "the NEW Accufab 70mm plenum + 70mm throttle body, for the ultimate intake combination! Combined power of 10HP / 15TQ on bolt on GT!"

Its around 450 for both before shipping and is only 10 rwhp.

Can anyone vouch for these numbers? and is 10 hp good for $450 bucks? Anyone know of a better brand/better results/lower price?

I'm still looking around, but I am going to get the steeda shifter, some "show" items, and am still looking into a few other things. I also saw on the same site that the mustang gt had 252 hp baseline. I know the 260 claimed is crank hp. has anyone dyno'd a stock gt? what was your hp?

also the steeda underdrive pulleys. Do they really give you 8-10 hp as claimed?

yes thats a good price for the gains you get but if you want to save a little cash dont get the accufab t/b its over priced and maybe adds .4 hp over other you can get a mac 70mm t/b and the c&l plenum for abut 300 shipped at www.crmotorsports.com
I know it this is getting long... so i will stop here for now

acidskie · 02-15-2004, 02:35 AM

Anyone tried the Ford Racing 70mm T/B?

xxxBlakexxx · 02-15-2004, 01:20 PM

I don't believe that TB's differ too much. Some companies make a polished on...but that's just an appearance thing.

96_4.6 · 02-17-2004, 11:12 AM

Yea Tb's differ. You get what you pay for, I have heard more negitvie things about the mac TB then positive. You can score one for 120 on ebay brand new, looks good, sounds good but I heard more people complain then say it was quality.

GTvert · 02-17-2004, 11:59 AM

I heard the same thing, something about it not fitting right?

Definitely get the pullies, A good bang for the buck.Make sure that you get the ones that replace the damper, not the piggy back style.

xxxBlakexxx · 02-17-2004, 04:37 PM

Thanks guys for the TB response...I never realized there was much of a difference.

Snakeman · 02-18-2004, 12:18 PM

here's mine
not the 70mm 2V model, but i can vouch for the quality

Jason1320 · 02-23-2004, 06:08 AM

I have only seen pully's that "piggy back". Who makes ones that do not?

acidskie · 02-23-2004, 09:21 PM

Steeda does.

Jason1320 · 02-25-2004, 10:40 AM

Is there a difference in application between the 70mm and 75mm T/B and plenum? There seems to be no price difference. Why would you choose the 70 over the 75? Is more not always better in this case?

acidskie · 02-27-2004, 02:04 AM

Anyone???? I would like to know as well.

blue00gt · 02-27-2004, 03:53 PM

Changing to bigger intake and exhaust parts will only gain you power if they are a restriction. If you go too big, you will lose a ton of torque down low and maybe gain an inconsequential amount of hp on the top end. Without changing the plenum or adding forced induction I wouldn't go over stock or 70mm TB at most, and you won't see any gains with the 70mm without other mods.

urstangsmoke · 02-27-2004, 04:29 PM

aren't 02 and 03 stangs stock 80mm ? i have been told that my a few people. if i chose to go with a C&L 85 mm MAF, 75 mm TB and plenum, would thisinconsequently leed to downed torque down low?
by the way, the steeda underdrive pulleys are everything they're cracked up to be

blue00gt · 02-27-2004, 08:17 PM

Yes, the MAF on '02 and '03 stangs is 80mm - I was talking about the TB.
There is nothing wrong with going with the 75mm if you are getting the plenum and MAF also. People have seen 20+ rwhp on the dyno with these mods along with an aftermarket intake elbow.

xxxBlakexxx · 02-27-2004, 09:34 PM

The latest issue of MM&FF had dyno results on the 70 mm and 75 mm TB and the C&L Plenun. The 75 mm TB had the best gains when used with the plenum. 12+ HP and 14+ Torque. The author stated that the "car pulls like a train in 4th geer" with these mods. I believe the 70 mm TB with the plenum put up 9 HP, but I don't have the article in front of me.

Good gains, but not quite as advertised.

urstangsmoke · 02-28-2004, 01:24 PM

thanks for clearing that up i was a little confused. those gains seem good enough for me. thanks for the info

acidskie · 03-01-2004, 07:44 AM

Yes! Thanks much.

02-09-2004, 07:47 PM	#1
acidskie Registered Member Join Date: Sep 2003 Posts: 47	Accufab 70mm plenum/throttle body. I saw this on a web site. They were claiming "the NEW Accufab 70mm plenum + 70mm throttle body, for the ultimate intake combination! Combined power of 10HP / 15TQ on bolt on GT!" Its around 450 for both before shipping and is only 10 rwhp. Can anyone vouch for these numbers? and is 10 hp good for $450 bucks? Anyone know of a better brand/better results/lower price? I'm still looking around, but I am going to get the steeda shifter, some "show" items, and am still looking into a few other things. I also saw on the same site that the mustang gt had 252 hp baseline. I know the 260 claimed is crank hp. has anyone dyno'd a stock gt? what was your hp? also the steeda underdrive pulleys. Do they really give you 8-10 hp as claimed? I know it this is getting long... so i will stop here for now

02-09-2004, 08:04 PM	#2
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Stock GT's tend to dyno in the neighborhood of 230 rwhp with a 5-speed. If you do a search on corral.net, there is alot of discussion and dyno results there on the various upper intake plenums made for 2V's (Accufab, C&L, Trick Flow, Dragon, etc.). They seem to be a good bang for the buck mod. As for underdrive pullies, they are definitely high up there on the bang for the buck list and from what I have seen they do give you the gains they claim. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

02-09-2004, 09:21 PM	#3
xxxBlakexxx Registered Member Join Date: Sep 2003 Location: Mountaintop, PA Posts: 634	I second Blue GT. One nice thing about the TB's and the plenums is that they can support additional mods down the road. I mean to say, they can help them work better. Also, they improve torque nicely through the power bands too. __________________ "Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org My Stang: 2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)

02-15-2004, 01:20 PM	#6
xxxBlakexxx Registered Member Join Date: Sep 2003 Location: Mountaintop, PA Posts: 634	I don't believe that TB's differ too much. Some companies make a polished on...but that's just an appearance thing. __________________ "Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org My Stang: 2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)

02-17-2004, 11:12 AM	#7
96_4.6 Registered Member Join Date: Jul 2002 Location: Michigan Posts: 417	Yea Tb's differ. You get what you pay for, I have heard more negitvie things about the mac TB then positive. You can score one for 120 on ebay brand new, looks good, sounds good but I heard more people complain then say it was quality. __________________ 1996 Mustang GT, AODE -Trickflow Upper Plenum -BBK 70mm Throttlebody -02 PI Lower Intake -March Pulleys -BBK H-Pipe -2 Chamber Flowmaster mufflers -3000 RPM Stall -JLT CAI with special K&N -MSD Supercondutor wires -180 stat -FRPP 4:10's *FOR SALE C&L TRUE FLOW INLET PIPE WITH K&N* My Stang

02-15-2004, 02:35 AM	#5
acidskie Registered Member Join Date: Sep 2003 Posts: 47	Anyone tried the Ford Racing 70mm T/B?

02-17-2004, 11:59 AM	#8
GTvert Registered Member Join Date: Apr 2003 Location: West Plains Posts: 74	I heard the same thing, something about it not fitting right? Definitely get the pullies, A good bang for the buck.Make sure that you get the ones that replace the damper, not the piggy back style. __________________ Slower Traffic Keep Right

02-17-2004, 04:37 PM	#9
xxxBlakexxx Registered Member Join Date: Sep 2003 Location: Mountaintop, PA Posts: 634	Thanks guys for the TB response...I never realized there was much of a difference. __________________ "Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org My Stang: 2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)

02-18-2004, 12:18 PM	#10
Snakeman Registered Member Join Date: Apr 1999 Location: Grass Valley, CA, USA Posts: 1,389	i like the Accufab T/B here's mine not the 70mm 2V model, but i can vouch for the quality __________________ LX ~vs~ Camaro

02-23-2004, 06:08 AM	#11
Jason1320 Registered Member Join Date: Jul 2003 Location: Bowie, MD Posts: 45	I have only seen pully's that "piggy back". Who makes ones that do not? __________________ 2003 Mustang Cobra (Sonic Blue) - Bone Stock!!! Best 1/4 mile - ???

02-23-2004, 09:21 PM	#12
acidskie Registered Member Join Date: Sep 2003 Posts: 47	Steeda does.

02-25-2004, 10:40 AM	#13
Jason1320 Registered Member Join Date: Jul 2003 Location: Bowie, MD Posts: 45	Is there a difference in application between the 70mm and 75mm T/B and plenum? There seems to be no price difference. Why would you choose the 70 over the 75? Is more not always better in this case? __________________ 2003 Mustang Cobra (Sonic Blue) - Bone Stock!!! Best 1/4 mile - ???

02-27-2004, 02:04 AM	#14
acidskie Registered Member Join Date: Sep 2003 Posts: 47	Anyone???? I would like to know as well.

02-27-2004, 03:53 PM	#15
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Changing to bigger intake and exhaust parts will only gain you power if they are a restriction. If you go too big, you will lose a ton of torque down low and maybe gain an inconsequential amount of hp on the top end. Without changing the plenum or adding forced induction I wouldn't go over stock or 70mm TB at most, and you won't see any gains with the 70mm without other mods. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

02-27-2004, 04:29 PM	#16
urstangsmoke Addict Join Date: Nov 2003 Location: chicopee, Ma. Posts: 82	aren't 02 and 03 stangs stock 80mm ? i have been told that my a few people. if i chose to go with a C&L 85 mm MAF, 75 mm TB and plenum, would thisinconsequently leed to downed torque down low? by the way, the steeda underdrive pulleys are everything they're cracked up to be __________________ '01 Roush Stage 3

02-27-2004, 08:17 PM	#17
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Yes, the MAF on '02 and '03 stangs is 80mm - I was talking about the TB. There is nothing wrong with going with the 75mm if you are getting the plenum and MAF also. People have seen 20+ rwhp on the dyno with these mods along with an aftermarket intake elbow. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

02-27-2004, 09:34 PM	#18
xxxBlakexxx Registered Member Join Date: Sep 2003 Location: Mountaintop, PA Posts: 634	The latest issue of MM&FF had dyno results on the 70 mm and 75 mm TB and the C&L Plenun. The 75 mm TB had the best gains when used with the plenum. 12+ HP and 14+ Torque. The author stated that the "car pulls like a train in 4th geer" with these mods. I believe the 70 mm TB with the plenum put up 9 HP, but I don't have the article in front of me. Good gains, but not quite as advertised. __________________ "Children should not get cancer, but they do!" Help a child with cancer at www.homeoftheirown.org My Stang: 2000 Mustang GT Vert - Steeda Tri-Ax Shifter; C&L Plenum; BBK 75 mm TB; Steeda Strut Tower Supports; Black "Deep Dish" Bullet Wheels; FRPP 4.10's; Steeda Subframes; SLP Catback & SLP Catted X-Pipe; SCT 4 Position Chip with 3 custom tunes; Steeda CAI; Venom-1000 Nitrous; Roush Stage 3 Body Kit; Bullet Suspension Package (on the way)

02-28-2004, 01:24 PM	#19
urstangsmoke Addict Join Date: Nov 2003 Location: chicopee, Ma. Posts: 82	thanks for clearing that up i was a little confused. those gains seem good enough for me. thanks for the info __________________ '01 Roush Stage 3

03-01-2004, 07:44 AM	#20
acidskie Registered Member Join Date: Sep 2003 Posts: 47	Yes! Thanks much.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
70mm throttle body big enough for my supercharged GT?	Skid	Modular Madness	4	05-08-2002 02:19 PM
MAC 70mm throttle body.	qhkajlog	Windsor Power	5	05-02-2002 09:10 PM
99-01 Gt Throttle Body 70mm Stock?	steedamustang01	Modular Madness	5	04-17-2002 11:54 PM
who makes the best 70mm throttle body	Mustangboy89	Windsor Power	12	02-16-2001 07:02 AM
70mm Throttle Body	Dino	Modular Madness	1	09-30-2000 08:57 AM